Re: Soyo SY-P4I875P Dragon 2 - cap questions

Thanks for the rapid response. I finally got to the SACON SZ size chart (after acroread installed the chinese character set it needed) so this is what I have (with vents) that needs to be replaced:

Qty__Value___Volts__Size___ESR___Ripple
10___470uF___16v___8x12__0.06___850
14__1000uF___10v___8x14__0.045__1050
7___1500uF___16v__10x25__0.012__2800
7___2200uF___6.3v__10x25__0.013__2700

The physical parts on the board do match the chart sizes. And they do have the vents stamped into...

What a great site - I stumbled on it looking for caps.

I have a Soyo SY-P4I875P Dragon 2 mobo that won't post and has 2 buldging caps beside the AGP slot. This board has SACON crapacitors and is of approximately 2003-2004 vintage. I have a few questions before I proceed with a recap of this board.

First, the problem may not have originated with the caps. The computer locked up one night and on reboot it failed to get beyond the initial diagnostics post screen, specifically it locked at the BIOS reflash entry prompt. Subsequent power cycles failed to post. On inspection...