Hi, thank you for trying. I could not get it to work unfortunately. Computer would power on, but there was only a black screen even after a long period of time (10 minutes or so) and multiple restarts. I reflashed the original back, so nothing lost, just back where I started.
I am using the CH341A with a clip and I have noticed that I get consistent scans while it's clipped up, but they are not consistent after it's been unclipped and reclipped. I have taken another scan after my most recent clip and will leave that attached. If anyone could try and patch the scan attached, it would...
goldhawks
New Member
Last Activity: 06-11-2024, 12:59 PM
Joined: 05-30-2024
Location: Fort Wayne, IN
-
Here is a picture of the bottom of my case. Thanks to soportenetfe for helping out and posting information as well!...
Leave a comment:
-
Hello all, new member, built a few PCs before, but never really dived much deeper than that until nowLeave a comment:
-
Lenovo Y40-80 bios
Hi all, I have a Lenovo Y40-80 that I am trying to remove the Admin password for. There is a password screen that comes up immediately that I can input a user password for (Pic 3) and this will allow me access to Windows or the BIOS, but a majority of the options are grayed out in the BIOS (Pic 4).
I have attached a picture of my overall chassis and a close up of the chip that I have read (using CH341A and AsProgrammer). I output two files from the chip and compared them (fc /b) and they were the same. I patched the first file (the file felt like it processed too quickly) and then...
No activity results to display
Leave a comment: