Success

I am happy to report that the replacement board T501045.00MSS from Moniserv fixed my monitor. I had replaced the caps and fuses but the fuses blew again. Moniserv told me they have a 30 return policy so if it did not fix my problem I could return it. So with the no risk (other than shipping costs) potential solution, I bought the board. It arrived very quickly and I now have my working monitor back. Thanks to all who helped.

John

Re: Dell W1700 LCD Rev00

Krankshaft,

Thanks for the suggestion. There are some photos of the board on this thread. Could you possibly point out the 4 driver transistors for me or at least describe their location on the board?

FYI, I did not blindly replace the fuses without knowing what was wrong. I replaced the fuses and the caps as described by this thread since it seemed to be a common problem and was the fix for several people. But now that the fuses re-blew I need to take a deeper look into the cause.

Regards,
John

Re: Dell W1700 LCD Rev00

Hello everyone. I hope this thread is still alive because I tried the fix but it did not fix my monitor.

Prior to repair, and thanks to this thread, I found that both of the fuses were blown. The caps seemed fine but I replaced both of them and both of the fuses. Confident that my nice monitor would work perfectly again following this 1 hour, $5 repair job, I put it all back together.

Alas, I powered up and still no picture. I have a green light on my power button and audio as I did before the repair.

I opened...