Few question about your LC-60LE835U
I have the same set with the 1-1 error
What was the part # of the LED?
How did you reset the 1-1 error?
Any help would be appreciated
Thanks
n01champion
Member
Last Activity: 08-03-2023, 05:32 PM
Joined: 04-21-2012
Location: Lauderhill
-
Re: Vizio VF551XVT not powering on, standby light on
Guess the help stops here -
Re: Vizio VF551XVT not powering on, standby light on
The button board is built into the main board (bottom red area) and the cables for the sensor (top red area) is either J4 (middle) J6 (left)
When I had sensor plugged out TV still does not turn on
Let me know if you need better pictures...Leave a comment:
-
Re: Vizio VF551XVT not powering on, standby light on
The remote does not operate the TV
ok I re-measured Vdc on the large cap..
TV unplugged - 160Vdc
TV standby - 395Vdc...Leave a comment:
-
Re: Vizio VF551XVT not powering on, standby light on
c443 is just the reflection of the light. its fine
F1, F2 and F3 all report 0.00 Ohms
The big cap on power supply sits at 338V when TV is on standy...Leave a comment:
-
Re: Vizio VF551XVT not powering on, standby light on
What big cap are you referring to on the power supply?
the PS_ON stays at 3.12V and does not change at all...Leave a comment:
-
Re: Vizio VF551XVT not powering on, standby light on
1. Yes the voltage goes to >3v upon plugging it in
2. I tried unplugged the 2 bunch of ribbon cables that go to the T-con board and still nothing...Leave a comment:
-
Vizio VF551XVT not powering on, standby light on
I have a VIZIO VF551XVT TrueLED TV.
The power button will not turn on the TV.
PSON = 3.14v
SB5V = 5.10v
When testing the with PSON voltage always remains the same when i press the power button.
A caps look good
Now I am stuck.. please help...Last edited by n01champion; 04-21-2012, 03:42 PM.
No activity results to display
Leave a comment: