Re: LNT3242X Samsung no picture
Thanks for the quick response...i will open and check the bulbs i will post back the result...thanks again.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
LNT3242X Samsung no picture
Hi everybody,
I need advice from the expert please....I,m fixing 32" samsung tv Model LNT3242HX, the problem is ...No picture...the power is good...when you turn on the LED on the front light-up and samsung sound on, backlight at the back turn on for 3 to 4 blinks and it shut down but the standby light on the front stays on. I changed the Inverter board with the good one but still same problem. I inspected all capacitors on the power board and all of theme are good.
need help please for this problem thank you in advance...
dbtsat
-
"T-Con board"
Hi to everybody,
Need an advice please...I'm looking for T-con board for 46 inches samsung tv,part number T460HW02. i find one in ebay and it`s from sanyo tv but the t-con is thesame part number from the samsung tv. My question is ....is this compatible with my samsung tv...Thank you very much for any advice.
dbtsat
-
Samsung LN40B530...Power on and off problem.
Hi to everybody...i have a tv Samsung LN40B530 with on and off problem,when you turn on the tv it will turn on for 3-4 seconds and then it shut down.I inspect all capacitors no sign of bad caps, the only thing i notice is the transformer location TI802 it looks like burn on top. How to check if this component is good or bad...Please help.
Thanks in advance for help/advice.
dbtsat
-
Re: Flex connector (LCD to Panel Board)
Thank you very much for the info...i will check at work if we have a conductive glue and i will try to fix it ...i have a 10x microscope to use...i will post if i have luck to fix this....just for fun!
Thanks again...
Leave a comment:
-
Re: Flex connector (LCD to Panel Board)
Thanks a lot for a quick reply...here is a pictures taken from my scrap unit.
thanks again......
Leave a comment:
-
Flex connector (LCD to Panel Board)
Hi to everybody,
This is my first post...I'm fixing samsung lcd tv(LN-T44661F) the problem is 3 flex connector from lcd to small top panel are totally out or no connection, is any body try to fix this problem? i know its not easy...but i want to fix it just for fun...i have some some tools to do it (Microscope,heatgun...)the only i need is instruction or advice on how to do it.
Thanks in advance for any suggestion or help.
dbtsat
No activity results to display
Show More
Leave a comment: