Will do
...
proaudiosoft
Senior Member
Last Activity: 09-12-2016, 01:08 AM
Joined: 04-03-2012
Location: saint louis missouri
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
Will do...
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
Interesting. I build bartop units mainly. goto bartop-arcade.com and check out some of my units...Last edited by proaudiosoft; 09-10-2016, 09:33 AM.Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
I have the Dimm with the SCSI connection for GD-ROM (yeah, wish i had the Netdimm module), I have the GD-ROM, SCSI cable, Naomi Main unit, Power Supply, IO board, Sports Jam and key. Harness to connect all etc... I left the audio amp inside. why not, its already connected to speakers and has volume pot. Every thing had light use, it belonged to a church. Machine will sell for about $1500-$2000 with over 10,000 games on it. Adding 4 more buttons per player, changing graphics above, adding a nice...Last edited by proaudiosoft; 09-10-2016, 12:08 AM.Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
I did, its a bad tube. I threw that sucker in the can. I am glad I trashed that piece of junk. On a good note, I fitted a 32inch Samsung Led monitor in its place. I got a great deal on it, $180. Check out Pics! It will be a great machine when I am done with it. I took all the Naomi stuff out of it. This machine will be ready to sell in a couple days...
Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
lol i hear that. I had 8vdc off my other board @ p203 (i did check it there carefully). So I am guessing this is a bunk tube. One resistor on this new board burned me, super hot! Oddly enough it is a different on that was falling off the original neckboard. I am guessing this tube probably has an internal short. Probably no sense in damaging two chassis...Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
can i do this with the neck board off the tube (@r215)? Aprox how high of voltage should I be looking for?
When I pull the neck board off and turn the machine on I hear arcing at the flyback suction cup
I read about 4vac on r215...Last edited by proaudiosoft; 09-08-2016, 12:34 PM.Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
I realize this. But this guy sounded on the up and up. He offers repair. He was even nice enough to ship me a "working" chassis with the agreement I would ship my bad one back to him. His chassis has a LED light wired in on external wires too, and it does light the led, just not the display/tube. I am guessing its about time to pull it and trash it?
Edit: Also, I have the Naomi dip switch set to 1up 2-4 down. So it should be in 15khz mode. Unit works fine on external VGA when set @ 31k...Last edited by proaudiosoft; 09-08-2016, 12:03 PM.Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
I just installed new chassis. Tube still does not glow or light? I guess I have a bad tube?...Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
Yes sir. I wish I had more time to mess with it, but I have too many projects going on right now. My work area is a nightmare lol. Now my wife's car is acting up, it never ends grrrr. I appreciate your help so much. I am sure we could have got it given more time. I am also sure I will need you help again sometime. If I can ever help you with anything I surely will. I build Bartop Arcades for a living, I would post my site, but I don't want to come off like I am spamming the boards. If you want it I will shoot...Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
I know, seriously considered pulling this thing out and throwing it away and sticking in a 32" monitor. Too bad everything has become widescreen else it would have been a no brainer. Also I would be losing the retro authenticity not to mention bezel modifications and the like. I am hoping I made the right choice. I will know by the end of this week. If the monitor has any other issue I suppose I can ship the parts back and just lose my shipping charges, so not that big of a loss. On a good...Last edited by proaudiosoft; 09-06-2016, 12:40 AM.Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
From what I read, the d9200 does not have this......Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
The Machine works fine, just playing blind. I hooked up a monitor when I got it home, plays great. I really wasnt worried much if it did or not though, I will be stripping all the boards and GDrom out of it. The only thing I am leaving is the Monitor (if i can get it working), and the audio amp. (and of course lighting coin mech etc...) I am not sure what you mean by "I shouldn't be asking for advice while buying things?" I asked because I was not 100% sure. After talking to the...Last edited by proaudiosoft; 09-06-2016, 12:07 AM.Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
Yeah, he was selling NOS he claimed on ebay. He directed me to buy it from his site. He sounded a little squirrely after our last chat.
I ended up buying from a guy named Stan doing repair outta South Carolina. His listing is for repair, but he is sending me a whole new complete chassis, after the repair I am going to send him my old chassis.
Here is his listing: [url]http://www.ebay.com/itm/WELLS-GARDNER-REPAIR-SERVICE-FOR-monitor-chassis-PD279200-/331961558856?[/url]Re: WGM2792...Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
Question, Will this work with my tube/yoke? :
[url]http://www.ebay.com/itm/27-CRT-Wells-Gardner-Arcade-Chassis-Monitor-D9200/291854020502?_trksid=p2060778.c100278.m3478&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140725135229%26meid%3D945ed5abead0478abcd9942704b4d1f8%26pid%3D100278%26rk%3D2%26rkt%3D4%26sd%3D331932555648[/url]
Curious, this guy is going to give me a pretty decent price, and the parts are NOSRe: WGM2792 Arcade Monitor Resistor Burn Off On Neck...Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
This neck board replacement looks like the same thing: [url]http://forums.arcade-museum.com/showthread.php?p=3431996#post3431996[/url]
He says its for D9200 later model chassis that used flyback 053X0658001. The numbers on mine are 6174Z-6005G ....
It sure looks like one in the same though...Re: WGM2792 Arcade Monitor Resistor ...t3431996[/url]...Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
I do not think this is cause of current issue, just years of heat focused in the area. When this problem is fixed I will tidy up and re-solder for good measure....Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
Checked, All are about 390Ω.... Pins 6&7 on the tube is about 9.63MΩ. What about 3 and 6 @ 1.1 ohm, is that ok?...Last edited by proaudiosoft; 09-03-2016, 02:13 PM.Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
Thanks for pointing that out Vince. I did notice this as well. It matches up with the spot on the metal plate that the boards mounting plate as well. (in attached pic)...Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
Yes, i am sorry. I should have been more specific. I was numbering them facing the tube from left to right. I am attaching a picture of the neck with the numbering, as well as the board....Leave a comment:
-
Re: WGM2792 Arcade Monitor Resistor Burn Off On Neck Board *Need Help*
I meant to say pins 1&6 are about 1.1 ohm, is this still ok?
I tested all the components you asked, all tested good....Last edited by proaudiosoft; 09-03-2016, 11:19 AM.Leave a comment:
No activity results to display
Leave a comment: