aaah .. makes sense ..
coming up as 2.6 ohms
I've measured a continuity test from ground to both sides of each cap and across said cap aswell and also when caps have been replaced.
James Boden
New Member
Last Activity: 10-20-2024, 06:51 AM
Joined: 03-03-2024
Location: Shropshire
-
EDM 033 caps I'd and purpose
Hey guys just wondering as to the purpose of these caps 560 but they seem to be shorted .. is it linked with the super low impedance of the CPU/GPU or do I have a short to search for ??.. the short is still there when caps have been removed.. sorry still learning really 😞. -
Hi Iam trying to look for this on the net it states it's a 560 , 2DDtn p. But I can't seem to find anything about it .. on my meter it comes up as 1.5 uf so Iam a little confused and have started to think Iam doing something stupid.. any enlightenment would be appreciated 😆....Leave a comment:
-
ps5 edam 330 boots but no video? ..changed HDMI port and ic ...ddc clock help?
Good evening, I've been stuck on a problem for a smidge now and not sure how to proceed..
Ps5 boots etc but just doesn't have any video .. put a new hdmi connector on and a new encoder.. and all the diode readings are good except
15- DDC clock - 671 - Iam getting 677
16- ddc data - 671 -iam getting 677
And hot plug (19) is 695 when should be 686..
Any ideas on what could cause this ? I have no knowledge of hdmi signals or EDM 033 board view to track where they go etc ..
Jim​ -
medion erazer p6681 : e15k_n17p 2.0 boardview and schematic help
Hi there,
I have been looking for the board view and schematic for a
medion erazer p6681 : e15k_n17p 2.0
any help would be fantastic I have been looking for days..
No activity results to display
Leave a comment: