It was not me, as I said it was another technician that did it and told me since i do board repair, i was already expecting a response like this, thank you...

80K, there is no short on this line too, i already expected this since the voltage wouldn't even rise in case it was shorted, signal lines are really high impedance, earlier i tried making a jumper from MAINON to +3VS5 since i noticed this line comes on when i press the power button and maintains itself, i got a higher current draw i believe is from the PCH VRM, but it didn't enable VCORE, and the power led kept blinking, the power LED is powered by a separate GPIO on the SIO (PWR_LED#), there is still a possibility of the SIO/PCH being damaged (i don't know which one is more likely to die by...

I got this motherboard from HP that wouldn't turn on, after testing it, turns out that the more accurate description would be that the power LED is flickering and it won't display anything, i got some backstory from this board, it wouldn't output video and another technician tried to reseat the LVDS cable with the laptop on hoping it would work, all it did was fry both the display and motherboard, magic smoke was released from the screen and cable, i thought the PCH was probably killed and went full shorted, i tested the PWM and it outputs a power good signal and no fault, but it quickly falls,...

Hello! My name is Brenno, I am from Brazil (before you ask, i don't speak spanish, and i don't live on a forest), I really like programming, electronics engineering and repair, music and photography, I am also a furry, My goal is to study electronics engineering (or something pretty close such as electrical engineering, automation, etc) and work on the military, that's pretty much all about me