My xbox one s died recently and currently it shows no signs of life. I took it apart and did some troubleshooting using board view to do some voltage checks in areas of interest. It doesn't appear to be a dead short since I get 12v on the caps near the cpu and other voltages like 3.3v, 5v, 1.1v as shown on the board file. I didn't check every point as that would take forever. When I look at it from my thermal camera, the Southbridge chip has a little glow on it when plugged into power.

The power switch on the detachable face board seems to be fine when using the multimeter to check....

Hi there! I'm someone who casually tinkers with electronics, from phones to PCs and game consoles. I enjoy exploring the ins and outs of technology and finding ways to make things work better.

Here's the file. This one passed verification, so it should be fine.

I couldn't find anything that looks like a serial number, only a MB sticker with: 1S31754640000089

Other info
BRAND: EVOO
MODEL: EVC156-2
FCC ID: 2APUQ-EVC156

EDIT: Made an error in the filename but its minor....

I tried using this against a bios dump from a weird EVOO-EVC125-2 laptop, but it didn't work. The result was +?+ as a password.
Unfortunately there are no downloads or support for this discontinued old model, so all I can do is dump and try that way to restore the laptop.
Can I upload the bios file for assistance?
​ [FONT=Arial][SIZE=12px][LIST][/LIST][/SIZE][/FONT]