CAD-Pig
New Member
Last Activity: 03-28-2024, 01:42 PM
Joined: 01-22-2024
Location: Cheltenham
-
You may find there is no component fitted. I have a MW83-RP0 and it also has blank spaces where components could be fitted. If you look under magnification are the solder lands slightly domed? Possible nothing fitted. If the land looks rough could be a resistor has been knocked off. Looks like a pair of FETs. -
Gigabyte MW83-RP0
Anyone help with schematic for the above mobo? New release from Gigabyte, I picked this up from a local shop for £100. It does work but one of the memory slots failed and I traced it to a damaged FET on the back of the board. Replaced with what I assume is the right type but the slot still fails at boot with a ram stick. -
Hello
New member. 64 year old with a BSc in Electronics.
Love to tinker with old stuff, currently working in the aerospace industry
Bit of hardware design, bit of software. Build my own PC.Leave a comment:
No activity results to display
Leave a comment: