Re: Samsung 910t
Done, but the led on the front panel of the monitor's plastic wont turn on!
What other test may can i do?
fabfisc
New Member
Last Activity: 03-09-2012, 04:39 AM
Joined: 02-28-2012
Location: Italy
-
Re: Samsung 910t
Hi again.
I bought the part and i'm going to assembly.
It will be very usefull if someone post a picture of the back of the pcb (need to see contacts soldering).
This is what i've done.
But i think i forgot something......Leave a comment:
-
Re: Samsung 910t
ok.
I'll buy the part and, once installed, will let you know.
Don't worry if you'll listen some strange sound, followed by an also strange dark cloud, from Italy!!! I'm still alive...hope
FabrizioLeave a comment:
-
Re: Samsung 910t
Yes, i think the code was that IC601.
Once changed, and hoping there's nothing else damaged on the pcb, the monitor must turn on, isn't it?
It's for this reason, still not changed the burned part, that the lcd, eventough connected with power cable and turned on, wan't light the led of power state.
Correct me if something wrong.Leave a comment:
-
Re: Samsung 910t
I've already serched for.
But every link lead me to the same pdf.
If you serch for "mj19bs schematic" on google, the first result (and not the only) is a link wich shows you the digital and analogic PCB, not the power board that i need!
Hope for someone who can help to identify that component.
Bill, thanks for your help. But if you could, also if your time will allows you, search for the part gone, i will be so thankfull...that i'll surely offer you a beer
Regards.
...Leave a comment:
-
Re: Samsung 910t
Many thanks for your answer.
Because of the front side exploded, the only code that i can see are:
"b2" on the upper left
"05" on the upper right.
6 Pin at all that i disassembled.
Thanks also for guide me to the "Manage Attachments"....Leave a comment:
-
Re: Samsung 910t
Hi, i know it's an old post, but i need some help.
I have a burned component and need to know it's description.
Attached an image with missing part.
Thanks in advanceLeave a comment:
-
Re: Samsung 910t
Hi, i know it's an old post, but i need some help.
I have a burned component and need to know it's description.
Attached an image with missing part.
Thanks in advance...Leave a comment:
No activity results to display
Leave a comment: