Each time I read it I get a different result
it's different every time...
LosAdanas
New Member
Last Activity: 02-22-2024, 02:44 AM
Joined: 11-14-2023
Location: Paris
-
Last edited by SMDFlea; 12-06-2023, 09:13 AM. -
Re: HP EliteBook x360 830 G7 bios password
[ATTACH]318321[/ATTACH]
With the EZP2023+ programmer it's ok ?Re: HP EliteBook x360 830 G7 bios password
[ATTACH]318321[/ATTACH]
With the EZP2023+ programmer it's ok ?...Leave a comment:
-
Re: HP EliteBook x360 830 G7 bios password
Good morning,
The bios is a W25Q256JVEN, I made a mistake on the first post
After wandering around the forum I start to get lost, I don't know anything about the subject
If you could shed some light on this for me please
What model of programmer do I need? and if I can do it without removing the solder
Thank you and have a good dayLeave a comment:
-
Elitebook X360 360 G7 Password Bios
Hello everyone
I have an Hp elitebook x360 830 G7, the bios is blocked with a password.
I bought a ch341a programmer with clamp and the bios is a W25Q257JVEN.
when I plug the programmer into my PC the ch341a software tells me that the programmer is not responding but sees it connected.
I don't have the equipment to remove the solder and I'm desperate to read the chipset. -
Elitebook X360 360 G7 Password Bios
Hello everyone
I have an Hp elitebook x360 830 G7, the bios is blocked with a password.
I bought a ch341a programmer with clamp and the bios is a W25Q257JVEN.
when I plug the programmer into my PC the ch341a software tells me that the programmer is not responding but sees it connected.
I don't have the equipment to remove the solder and I'm desperate to read the chipset.Leave a comment:
-
Re: New Members - please post your introductions here
Hello,
I'm from France,
I found this forum while wandering around the net because I have a bios problem and I found it very interesting that this whole community found solutions to the problems, and I hope that I could solve my problem with you too.
Thank youLeave a comment:
No activity results to display
Leave a comment: