So I got the capacitor removed. Only one of them was burnt. The others seem fine.

I was trying to test the other 3 caps, but they are not the standard Apple caps. They are Samsung 1827 S3C ones. Bunch of them on the board overall, but they show up as blank on my Capacitor Tester. Their resistance is also near 0. I tested quite a few of these ones, on both sides of the board and the results are mostly the same.

The other standard Apple caps are detected fine, and the meter shows ESR, capacitance, voltage leak values for them. These show a much higher resistance value...

Ok I got the boardview of this machine and looks like they are the PPBUS_G3H Capacitors. The PDF shows them as "OMIT_TABLE" and "CRITICAL", and so am I right to assume that they are absolutely needed?

Also these are 16V 33uF. What can I replace them with?

Will these work - https://leeselectronic.com/en/produc...-5-mpc725.html
Same as these I guess - https://www.digikey.ca/en/products/d...X336M035ATE175

Just wondering from a size pov