Re: DELL GX620 DT board needs recapped

I went ahead and pulled the board and grabbed a count and values from the board.

It matches the SFF kit exact.

4 2200uF 6.3v
5 1800uF 6.3v
1 1000uF 16v

It also has quite a few(25) 220uF 16v caps but they are all in good shape. I can't imagine replacing all of these as the kit above has all the caps from the memory area and the chipset area covered. I'm currently getting memory errors so I think this may be what I need. The caps that are popped are two of the 6.3v 2200uFs near the chipset....

Re: DELL GX620 DT board needs recapped

Hopefully this will be seen and I get a response. I wanted to email someone at the actual store but it says to use the forums here.

Re: DELL GX620 DT board needs recapped

I was more hoping to just buy a kit to replace them all. I don't want to replace the bad ones and have some other fail in a couple months. As for a repair, unfortunately that is out of the question. I can pick up a system pull motherboard with a 90 day warranty for around $25. I'd rather try to fix this for $10 in caps and have the satisfaction of doing it myself. Thanks for the response though.

I have a GX620 desktop and it has a crapload of split tops with some electrolyte on them. I want to purchase a kit of caps from the store but they only list the SFF and USFF boards in the kits. Is there another kit for the DT boards or can someone help me figure out what I may need to buy?

Symptoms:
PC is very slow and memtest86 shows errors non stop once it hits the 128MB mark no matter what stick of ram is in it.

Re: Dell 2007WFP Constant On/Off

Having the same issue as well. I reflowed all the major components with no luck. I haven't done the small smd on the back of the board. Did you ever resolve your issue?