Re: REMOVE PASSWORD EPSON EMP-400We

Forgot to mention, once the projector is turned on without the coversensor of the lamp engaged; it will not start properly. You will need to turn it off fully, engage the little switch (so that it is shorting) and you can run the projector topless. For the reset purpose.

After the reset the code 1793 was accepted into the projector and the boot logo and warning will remain each time you will power it up. I have not succeeded to either change or remove the security features. As I suspect these are part of the firmware. As you'll need...

Re: REMOVE PASSWORD EPSON EMP-400We

Sorry to bump this year old topic, but... I come with good news;

I managed to get ahold of such projector for 30 EUR second hand. Came without a remote. So I used a Logitech Harmony 300 to mimic it's movements (USE profile Epson EMP-822H) because the correct one does not have the button bindings for 0-9 keys !

When the projector was connected to the mains outlet, the standby LED was on. And shorted the two pins RST-PW a few times. Maybe later on i've turned on the projector while 'running' and did the same. I recommend...