So i have a panasonic th-42pd60u with a 10 flash when powered on. I did a lot of research and followed tech guide to lead me to replace the sc board. I did this and still the same thing. Im not sure why everything pointed to this and still have the same error. Any suggestions?

Thanks

Re: Panasonic Plasma 10 Blink

Ok Thanks Ill check it out

Re: Panasonic Plasma 10 Blink

would the fuses on the board not blow before the caps would?

Hello im new to the forum and im sure this has been asked before. I have a TH-42PD60U 8th gen panasonic plasma which just quit and is giving me the 10 blinks when i push power button. I have looked at the capacitors on the power board and they all look good. I have also checked the fuses on the board and they are also good. Has anyone else experienced this and knows what board I would have to either fix or replace? I have followed a diagram that made me test a few boards and I came up with the SC Board. Im not sure if i did it all right tho. Any help on this would be great.

Thanks...