Re: Dell 2000FP Blank screen problem



Unfortunately not.



As you can see in [I]Dell 2000FP interface BD.pdf[/I] on page 6, the 24C02 I²C EEPROM for DDC is directly connected to and supplied by the DVI connector.Re: Dell 2000FP Blank screen problem



Unfortunately not.



As you can see in [I]Dell 2000FP interface BD.pdf[/I] on page 6, the 24C02 I²C EEPROM for DDC is directly connected to and supplied by the DVI connector.Re: Dell 2000FP Blank screen problem



Unfortunately...

Re: Dell 2000FP Blank screen problem

Unfortunately, my 2000FP also got the all LEDs lit bug. And I'm not able to resolder TSOPs ;-(
I'm also not sure whether it's really the flash, because very, very seldom it still starts up, but crashes later.
I discovered quite some service manuals [URL="http://tsimexico.com/tsi/DELL/2000FP/"]here[/URL]. Interesting findings:

Checking the clocks as per [I]Dell 200FP trouble shooting.PDF[/I]:
16 MHz clock:


130 MHz clock:


CON111
1: RESET
2:...

Jentec JTA0302F-E for the D-Link DGS-1008D



Thanks for this information! With it, I was able to [URL="http://sven.killig.de/recapping/"]repair[/URL] two similar Jentec JTA0302F-E (5 V, 3 A) PSUs for the D-Link DGS-1008D Jentec JTA0302F-E for the D-Link DGS-1008D



Thanks for this information! With it, I was able to [URL="http://sven.killig.de/recapping/"]repair[/URL] two similar Jentec JTA0302F-E (5 V, 3 A) PSUs for the D-Link DGS-1008D Jentec JTA0302F-E for the D-Link DGS-1008D



...