Re: BOE HV650QUB-F70 TCON issue - VGH AVDD HAVDD no voltage - caps seem ok
hey guys, I fixed it by baking tcon card in the oven! it works now! I've ordered a replacement tcon since i don't think it'll work for too long....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: BOE HV650QUB-F70 TCON issue - VGH AVDD HAVDD no voltage - caps seem ok
hi, thanks for your reply
i desoldered it and it reads 516 nF
on the board from ground to one end it's 1m-ish, other end 0.8m-ish, capacitor resistance reading changes between 2m ohm to 300kohm
I've also noticed there are a bunch of tiny similar capacitors near the processor and they don't have a short to GND as well, there's a few hundred kohms resistance to GND....
Leave a comment:
-
BOE HV650QUB-F70 TCON issue - VGH AVDD HAVDD no voltage - caps seem ok
I have an Arcelik TV with BOE HV650QUB-F70 TCON board, but I think there's an issue with/around PMIC.
PMIC: iML8940
There is backlight and sound, but no picture. I watched a YouTube video and turned it off, half an hour later it was dead.
Input 12v, fuse ok
DVDD1V2 = 1.2v
DVDD1V8 = 1.8v
DVDD3V3 = 3.3v
VGL = -7v
**VGH = -0.3v
**VCOM0, AVDD, HAVDD = 0v
SWBK1 = 3.3v
SW1 = 12v
VGH to GND resistance is 500kohm as expected
Readings are same after I disconnected the two cables from TCON to panel...Last edited by cagri; 07-27-2023, 10:32 PM.
-
Re: New Members - please post your introductions here
hey, here to get some help about the lcd panel controller that's made me go crazy lol
Leave a comment:
No activity results to display
Show More
Leave a comment: