Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
Hello all, I just replaced the Main Board with a replacement from River Valley Electronics and still GETTING WHITE PICTURE!!!
This is very frustrating - if anyone else has any more suggestions, I'll entertain. At this point, I have no idea what to do next...
vwmeche94
Member
Last Activity: 12-06-2012, 12:48 PM
Joined: 01-09-2012
Location: Opelousas, Louisiana, USA
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
Hello all, I just replaced the T-Con "VB" board with a replacement from ShopJimmy.com and my problem is still there although the image appears to be displaying better.
I've attempted to reset through the menu command. Is there anything else I can do to recover good picture?Leave a comment:
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
Hey BC.NET contributors to this thread,
I found the following quote - I don't know if it works, but I'm going to attempt as SOON as I get home and let the group know:
[url]http://forum.eserviceinfo.com/viewtopic.php?p=157666[/url]
"Lance wrote:
Hey, I have the same tv as well the dx-lcd32-09 Dynex 32" and mine is doing the same thing it only shows 1/3 and on mine it will actually flicker on and off so sometimes its there and sometimes not....Leave a comment:
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
Hey Momaka and Tom66, I uploaded the larger T-Con pic as instructed... what equipment and where can I begin checking?
Thank you again,
vwmeche94Leave a comment:
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
Here is a larger picture of the T-Con....Leave a comment:
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
I noticed on ebay that there are different alphanumerics of different T-Cons in the "VB S291010" place. I.E., "WA C17V011".
Is this critical to match exactly?Leave a comment:
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
tom66,
I believe you're asking about these numbers (see image and below):
[LIST][*]CPT 320WF01C[*]307[*]E187565[*]VB S291010[/LIST]- Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
tom66,
I believe you're asking about these numbers (see image and below):
[LIST] - CPT 320WF01C
- 307
- E187565
- VB S291010[/LIST]
Leave a comment:
- Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
Okay, realized you meant I had to go deeper... here we go....Leave a comment:
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
T66,
Here is the pic of my T-CON board... sincere thank you!...Leave a comment:
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
T66 and RetCaps,
Thanks big time for the feedback guys!
I went and looked where shown and found the T-Con. I have no fear of trying to perform component level repairs; I'm a mechanical engineer by training, so any electrical knowledge gained will fit perfectly into my "toolbag."
I will order from the link shown at ebay though, make repairs (hopefully successful) to my original board and sell for a few bucks or just give away for cost of shipping...Leave a comment:
-
Re: Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
TOM66,
Thank you for the reply. Is the $20 part the entire T-CON or a component on the board?
I have already opened the tv up and taken the following pictures (attached).
I don't think I got a picture of the T-CON; I believe I got the mainboard for cable connections and the power supply board?
Where can I find the T-CON board for purchase at $20?...Leave a comment:
-
Dynex DX-LCD32-09 Power, sound, but screen/picture is bright white no color
BC.Net,
We have a Dynex DX-LCD32-09 TV with the following:
S/N 1291LC32HV40H13961
LOT 470585
XHT 081139
Last week, my two youngest were watching a show and the screen all of a sudden went white; you can make out images and there is sound, but no color.
I contacted Dynex Customer Support and they keep trying to force me to Geek Squad. I know the fix is less than what I'd be paying for them to troubleshoot.
I've seen at least one other post about this model on the forum, so others have experienced...
No activity results to display
Leave a comment: