Re: Thermador Oven Controler Dim display

ha -- on this image I found on the web C5 seems to be 470uF

Re: Thermador Oven Controler Dim display

bugaga -- those Cs are on the board itself, saw on the photo
confirming (at least capacities/voltages)

C1 3,300uF 16V, size skinny 12.5x25mm LS=5mm
C8 470uF 16V, size 10x20mm LS=5mm
C9 100uF 50V, size 8x11mm LS=3.5mm

then I see not mentioned before

C3 4.7uF 34V -- likely
C11 ??? - can't even see and there is more capacitors which could be observed.

and I think C5 is the one near the big C1 , I see that it is 16V but can't decipher capacity (attaching...

Re: Thermador Oven Controler Dim display



That is how I found this particular threads -- by searching for Thermador 486752 which is exactly what I have (I think). I have found some olderish photos aiming at various capacitors (see more on [url]http://www.oneukrainian.com/tmp/thermador-1/[/url] -- didn't want to flood here).

In the thread above people are talking about C5 -- I wonder if they were referring to some specific schematic or photo? I guess if I get a full list, I can venture to try replacing them all again, this time more "thoroughly"...

Re: Thermador Oven Controler Dim display

Hi @redwire, have you succeeded on your endeavor?

I have tried fixing up the board in the oven 6 years ago when we just got the house with this stove, I don't remember which capacitors I did change but probably not all and that resulted in ... no positive effect on the problem of the dim display. Now it is pretty much entirely invisible, so I finally decided to look into it again and came about your post.