Re: Philips 42PFL5432D/37
Okay, I am driving from OK to IN, my mother has had a stroke. I will get back on this as soon as I return. Thank you so much for all your help.
PoteauPets
Senior Member
Last Activity: 01-15-2013, 06:57 PM
Joined: 01-01-2012
Location: Poteau, OK
-
Re: Philips 42PFL5432D/37
Yes, that is CN902, if you put one tester on the red, and then the other on each of the white ones, you get 10 tests. At least that is what I come up with, unless I'm doing it wrong....Leave a comment:
-
Re: Philips 42PFL5432D/37
Testing in progress:
With tv powered off this morning: (just for a starting ref)
1=0
2=12.10
3=0
4=12.1
5=.4
6=0
7=0
8=0
9=0
10=0
With tv turned on:
1=0
2=12.31
3=12.3
4=21.4
5=21.1
6=24.4
7=24.4
8=24.4
9=21.6
10=24.4
When tv lost picture
1=0
2=12.06
3=12.1
4=.4
5=0
6=0
7=0
8=0
9=0
10=0
BTW, I have...Leave a comment:
-
Re: Philips 42PFL5432D/37
Just found this post in my local area. Wondering if this would be fixable or if I could use it for parts to fix mine. What do you guys think? I just sent her a message to see what her bottom dollar is. Here is her actual picture and description.
42' Phillips Flat Screen w/Ambulight for sale. Also comes with the remote.
It has a black strip down the side of the screen other than that it works fine. My son uses it to play the 360 & watch movies on. Make me an offer....Leave a comment:
-
Re: Philips 42PFL5432D/37
Close up of the area in red per your request. And yes, when it kicks off, we still have sound and back lights.
What do I set the meter to to perform the above mentioned test?
Tested with TV Powered On, Meter set @ DcV -20
GND=0
SDA=3.28
VIN=12.00
SCL=3.28
TSTPGM=.01
Tested when the TV Shut off, Meter set @ DcV -20
GND=.01
SDA=.01
VIN=.45
SCL=0
TSTPGM=0...Leave a comment:
-
Re: Philips 42PFL5432D/37
The white label info is as follows:
ADPF 24300R1P
P4P77 773911322Leave a comment:
-
Re: Philips 42PFL5432D/37
Here are the latest pictures. By the way, Thank you all for your help !!!!...Leave a comment:
-
Re: Philips 42PFL5432D/37
Readings with TV ON
ANE 8815 AECS 250 0719
Pin 1=2.49v
Pin 2=0
Pin 3=3.27v
6343 74J3Z
Pin 1=0
Pin 2=3.69v
Pin 3=2.81v
Readings when the TV kicks off=0 across the board.Last edited by PoteauPets; 02-11-2012, 12:17 AM.Leave a comment:
-
Re: Philips 42PFL5432D/37
Yes, I remember that post....=(...Leave a comment:
-
Re: Philips 42PFL5432D/37
Part numbers
ANE 8815
AECS 250
0719
6343
74J3Z
Will post readings momentarily.Leave a comment:
-
Re: Philips 42PFL5432D/37
I have a new digital multi-meter. It's the same one TBuch bought in an earlier post, with which I tested all the diodes.
Where and what exactly is the T-Con???Leave a comment:
-
Hey T,
Got my caps on Tues. Re-capped everything on the scaler board last nite. Hooked it up and SAME PROBLEM..............waaaaahahawaaa.........=( -
Re: Philips 42PFL5432D/37
OH, and with the help of TBuch, I tested all the diodes while waiting for the last shipment of caps. They all checked out fine.Leave a comment:
-
Re: Philips 42PFL5432D/37
Hey Guys,
I've been away for awhile taking care of my husbands elderly parents, but am still having TV issues.
Here's what I have done so far :
1) Re-capped bloated caps on Scaler board. (I think it was only 2 or 3)
TV would still shut off after 20-30 mins or so.
2) Re-capped most all caps on the power board
TV still had same issue, but discovered that if we kept a fan running
behind it it would stay on all day & all night.
3) You guys had me doubt my original solder...Leave a comment:
-
Re: Philips 42PFL5432D/37
I'm in Tulsa all day today. (The big city) Does anyone know where I might pick up caps while I am here ? Just a thought.Leave a comment:
-
Re: Philips 42PFL5432D/37
Lelon probably.[/QUOTE]
Is Lelon a good brand ?Re: Philips 42PFL5432D/37
Lelon probably.[/QUOTE]
Is Lelon a good brand ?Re: Philips 42PFL5432D/37
Lelon probably.[/QUOTE]
Is Lelon a good brand ?Leave a comment:
-
Re: Philips 42PFL5432D/37
The red one was my first attempt at soldering, remember? I was using thicker solder. I took that one off and re-did it and they are both nice and shiny and don't seem to wiggle.Leave a comment:
-
Re: Philips 42PFL5432D/37
Well, I managed to get one decent shot of my soldering. I found out that there are a total of 14 capXons on that board. I have already replaced 3. The others are:
100 uf 25v (qty 3)
220 uf 16v (qty 6)
220 uf 25v (qty2)
Does anybody know what those two green caps are? The name starts with a cursive L and I can't make out the rest. Don't know if they are a decent brand or not. Am wondering if I should replace them as well.
They are 470 uf 35v...Leave a comment:
-
Re: Philips 42PFL5432D/37
Have you tried running one speaker on the output of the other? The connectors are keyed so it may be difficult to do so.
--------------------------------------------------------------------------------
Yes, I can hook up either side of the speaker sound bar to the Speaker Connector & get sound so it's not the speakers inside the sound bar. It's the left set side of where you hook up the speakers (top RT side of 1st pic) and I followed the trail to a CapXon cap. BTW, there are lots more CapXons there. That was the first board I...Leave a comment:
-
Re: Philips 42PFL5432D/37
Getting ready to remove the board to take pics, but have another issue that I wanted your input on. This may or may not be related to the t.v losing picture but you would know better than I.
I ALWAYS noticed that the sound seemed louder on the RT of the soundbar. Anyway, when we hooked the sound bar up last nite I noticed that there was NO sound on the LEFT side. So, I followed it to the ONLY CapXon left on the board. In the meantime, I hooked up both sides of the sound bar to the CN801 side on the speaker connector and now the soundbar works on...Leave a comment:
No activity results to display
Leave a comment: