Raphael Nike[USER="541574"]Raphael Nike[/USER] Visit this link: [URL]https://rog.asus.com/laptops/rog-zephyrus/2021-rog-zephyrus-g15-series/helpdesk_bios/[/URL] and choose your model (GA503QS). You'll find BIOS downloads for both Windows and ASUS EZ Flash Utility.
However,...
alexfts20
Member
Last Activity: 11-24-2024, 09:26 AM
Joined: 06-22-2023
Location: Bishkek
-
Raphael Nike[USER="541574"]Raphael Nike[/USER] The Asus EZ Flash Utility cannot write dumps that were read using SPI flash programmers.
Why do you want to update the BIOS?Leave a comment:
-
MARIH22[USER="388034"]MARIH22[/USER] Simply open these files in your programmer application. The file extension doesn't matter.Leave a comment:
-
MARIH22[USER="388034"]MARIH22[/USER] Here you are. Please don’t forget to make a backup....Leave a comment:
-
It must be from the opposite side of the board. It looks like there is no schematic on this board, but you can find the charger datasheet on the TI website....Leave a comment:
-
Raphael Nike[USER="541574"]Raphael Nike[/USER] How are you attempting to write this dump? Are you using some sort of SPI flash programmer?Leave a comment:
-
Raphael Nike[USER="541574"]Raphael Nike[/USER] 309Leave a comment:
-
ongobongo[USER="470706"]ongobongo[/USER] You’re welcome, ongo! I’m thrilled to hear that the solution worked and your problem is resolved. 😊Leave a comment:
-
ongobongo[USER="470706"]ongobongo[/USER] Try disabling the onboard RAM by moving the board ID resistors as shown in the attached photos:
[ATTACH=JSON]{"data-align":"none","data-size":"small","data-attachmentid":3286905}[/ATTACH]...Leave a comment:
-
ongobongo[USER="470706"]ongobongo[/USER] Could you please provide the model name from the board? For example, (NM-C771).Leave a comment:
-
bibinskii[USER="416581"]bibinskii[/USER] Begin by conducting a visual inspection of both sides of the board under a microscope to identify and replace any corroded components. Following that, proceed to measure the resistance on the secondary...Leave a comment:
-
Raphael Nike[USER="541574"]Raphael Nike[/USER] Try this one (make sure to backup your current firmware):...Leave a comment:
-
bibinskii[USER="416581"]bibinskii[/USER] This type of symptomatology can arise from:
1. A weak or inadequate power supply that is unable to provide sufficient current to boot...Leave a comment:
-
gjgib[USER="439608"]gjgib[/USER] You don't have [B]DISP_ON[/B] which comes from 2001 chipset. Please check PM.[USER="439608"]gjgib[/USER] You don't have [B]DISP_ON[/B] which comes from 2001 chipset. Please check PM.[USER="439608"]gjgib[/USER] You don't have [B]DISP_ON[/B] which comes from 2001 chipset. Please check PM.Leave a comment:
-
Manjunathrawoor[USER="349050"]Manjunathrawoor[/USER] Hello. Could you please provide more information about your laptop?Leave a comment:
-
Leave a comment:
-
swerg[USER="549159"]swerg[/USER] You're welcome! Glad to hear you got the screen backlight LEDs working again.
As for software, I use nextbv.app for viewing boardview and schematic files. The boardview file I found somewhere on Google.Leave a comment:
-
pastorello[USER="549208"]pastorello[/USER] It's nice to hear that your board is back to life. It must have been quite a challenge...Leave a comment:
No activity results to display
Leave a comment: