Thank you! Turned on then shut down, didn't reboot. Manually press power button and rebooted twice and stays on, the CPU isn't getting warm though, no display.
UPDATE: Skill issue, loose resistor. Your BIOS worked like a charm....
bzzt
Member
Last Activity: 01-26-2025, 10:47 AM
Joined: 06-07-2023
Location: Almere
-
Could someone have a look at this dump?
Startup error melody 0285 "TCG-compliant functionality-related error(might be the TPM initialization failure". Laptop behaves differently with other bios'es, but I'm not certain if this is the issue, seems fine hardware-wise.
Thinkpad E590 20NB-A001MB
Board Nr NM-D911 REV 2.0
S/N PF-1XXALX...Leave a comment:
-
This is a fantastic discovery Maxpower3
Unfortunately I made a stupid mistake with the bypass method and think have to reflash the NPCE68B. Anyone any succes with a RT809?
Leave a comment:
-
Thanks for sharing, much appreciated.Leave a comment:
-
Thanks for the wriite-up. Worked perfectly on a Dell 5430 BIOS 1.18.0....Leave a comment:
-
Thank you so much! Worked like a charm....Leave a comment:
-
Apologies, was in the .txt. Serial is 5CD206HK2T...Leave a comment:
-
Thank you so much for these files, used these to "remove" password from a 440 G8. Used BCU to save original DMI info, and put it back after flashing. Do you have the files for the device in [URL="https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/88810-need-dump-for-hp-brobook-450-g8-password?p=3176111#post3176111"]this[/URL] post as well? I'm trying to learn how to do this myself, but having difficulties acquiring (or in case of HP, creating) clean BIOSes. Info seems s...Leave a comment:
-
Hello, I received an HP 450 G8 (DAX8QIMB8B1 REV:B) with the "HP Endpoint Security" error.
Attached are the BIOS and EC dumps, could someone help me solve this problem? Or provide insight
in how to solve the problem myself would be appreciated as well. Tag included in txt in the zip file.
Thanks in advance!...Leave a comment:
-
Hello everyone, quick introduction. Been working for a repair shop the past few months and have been looking into BIOS repair, ME cleaning, extracting from executables, DMI data, offset locations etc and gathering as much info as I can. With varying degrees of success
Also localizing and repairing shorts, some software work, screen replacements, hinge repairs you name it.
Leave a comment:
No activity results to display
Leave a comment: