Re: Panasonic TX-P50U30B power issue
Hi. Remote control arrived now. Reset it to factory defaults and the TV image is now clear with no service info on the screen
Many thanks <kasfamily>...
ag63kry
New Member
Last Activity: 06-08-2023, 09:03 AM
Joined: 05-24-2023
Location: Warwick
-
Re: Panasonic TX-P50U30B power issue
No it does not work. <Start adjustment menu > still on the scrren first thing when I power up...Leave a comment:
-
Re: Panasonic TX-P50U30B power issue
thanks for that. New remote ordered, will keep you updated
Thanks for your help Kasfamily...Leave a comment:
-
Re: Panasonic TX-P50U30B power issue
Hi. No. It always goes to the same menu. I have also tried to leave with no power for 60 minutes, no difference...Leave a comment:
-
Re: Panasonic TX-P50U30B power issue
I don't have a Menu button on the remote I bought the TV with. I will order a new one if that is a working solution. You sure you are this will work?
Thanks...Leave a comment:
-
Re: Panasonic TX-P50U30B power issue
Hi. Thanks for that. It does not work. It all starts when I turn on the TV . It says <Start adjust menu> and then the attached picture is displayed. If I press exit, it is gone, but stiil the red service info remains at the left side of the screen. The remote control does not also have a Menu button , otherwise I would have tried to factory reset it.
So stuck here, no idea what else to try...Leave a comment:
-
Re: Panasonic TX-P50U30B power issue
Hi. Thanks for that.
Issue now solved , changed the A board, all ok.
The only thing is that I have au automatic menu activated when I start the TV- see picture. Even if I press exit, the red info (setvice mode info I guess) remains on the screen which is absolutely annoying
Anyone have any idea?
Thanks...Last edited by ag63kry; 05-26-2023, 04:40 AM.Leave a comment:
-
Panasonic TX-P50U30B power issue
Hi
Got my Panasonic plasma tv that stopped working suddenly.
Took out the cover all the leads from the powr baord in the middle apart of the main 220AC. and measured Vsus and 15V DC on P2 and P11 connector. Found nothing. Concluded it is the board
Replaced with a second hand one but still the same issue.
Cannot see the 5V or the 15V on the board with or without all the other leads attached.
Here is an example of what I have measured on P6 connector (see the image).
3V DC on pin 6 (STBby 5V and
0,3V DC on pin 7 (F_stdby_on)
No lights on LED,...Last edited by ag63kry; 05-24-2023, 10:28 AM. -
Re: New Members - please post your introductions here
Hi
My name is Cristian and I like to diagnise things. Living in Warwick , UK, I am trying to gather experience using these discussions
ThanksLeave a comment:
No activity results to display
Leave a comment: