Re: HP EliteBook 845 G7 BIOS Pass
Hello, sorry for my english. I soldered the chips back to the board, the laptop did not start, I looked at the board again and found that the sixth pin was soldered on one of the chips. After the soldering, everything started and, lo and behold, the admin password disappeared, but the Endpoint Security Controller inscription appeared. In any case, it's better than not having access to BIOS settings. Now everything works except this warning at startup....
Mijgan
New Member
Last Activity: 07-05-2023, 11:37 PM
Joined: 12-15-2011
Location:
-
Re: HP EliteBook 845 G7 BIOS Pass
Today i updated my CH341A programmer (3.3v FIX). I'm using other software for read BIOS chip, but reading data absolutely identical with files read earlier.Leave a comment:
-
Re: RCUnlocker
I soldered both chips and read them on CH341. Read and verify 2-3 times. All read data is identical....Leave a comment:
-
Re: RCUnlocker
Hello everyone, I have an HP EliteBook 845 G7
The bios has an admin password. On the board 2 bios WINBOND 25Q256JVEN, both chips are the same in 32MB. I apply 2 bios 32mb each (under the board) + 32mb (under the cover)
Can someone help me remove the admin password?...Last edited by Mijgan; 04-01-2022, 08:54 AM.Leave a comment:
-
Re: Dell G3 3579 LA-F611P Schematic
Many thanks!Leave a comment:
-
Re: [TUTORIAL] fix asus bios with bios from asus web support
Thanks a lot!!! Restored ASUS X542UA(M/B X542UQ Rev2.0) laptop, it locked bios admin password.Leave a comment:
No activity results to display
Leave a comment: