Few question about your LC-60LE835U
I have the same set with the 1-1 error
What was the part # of the LED?
How did you reset the 1-1 error?
Any help would be appreciated
Thanks
OneAn9ryN00b
Member
Last Activity: 08-21-2023, 05:48 PM
Joined: 12-12-2011
Location: Augusta, ME
-
Re: Help with a Sharp LC-60LE835U
I can try....TV is still working great to this day. -
Re: Samsung LN32A330 dark ring around screen
Dang....ok so next question. Is this going to get worse until i have no picture at all, or is this the extent of it?...Leave a comment:
-
Re: Samsung LN32A330 dark ring around screen
How would one go about changing one of those?
Is that a replaceable part?...Leave a comment:
-
Samsung LN32A330 dark ring around screen
So I fixed the tcon board on this tv i found off craigslist, and now notice a dark ring around the screen.
Im posting a pic of what it looks like. Its not bad, on white screen, but noticeable on darker screens. Is this an image burn-in, or a ccfl light getting ready to go? AKA is this going to get worse anytime soon, or just stay like this for a while?
Also if it is an image burn-in problem, would running one of those burn-in screen fixing videos work?
Or is this an inverter problem? Or is this even reparable?
Thanks in advanced.... -
Re: Samsung LN32A330 Gamma Voltage check.
Just checked those ones again, and still 0 for 14, and 13 was at 4.99 and slowly creeping up to 5.07 in about the one minute that I had it on.Leave a comment:
-
Samsung LN32A330 Gamma Voltage check.
Gma
1. 13.18
2. 10.38
3. 9.61
4. 9.00
5. 8.55
6.7.47
7. 7.05
8. 6.64
9. 6.19
10. 5.05
11. 4.55
12. 3.97
13. 4.55
14. 0.00
VDD. 3.35
VGH. 19.90
VDA. 13.79
VGL. -5.77
VCM. 12.12
I tested all the points marked in the image.
I tried using the spreadsheet but since i have less then 15 points. All i get is a "VALUE" error.
Symptoms are that it looks like it is a gamma chip, but just want a second opinion. White faint... -
Re: Samsung LN40B530P7N
Here's a pic of the whole board, it probably will be a different board, as its from a Samsung LN32A330. I did find test points GM5 through GM14 near the top left. But thats all I could find....this is like where's waldo...Leave a comment:
-
Re: Samsung LN40B530P7N
Country updated. And yes I did read through the thread, along with many others trying to figure out where to test.
Edit: I can't find anything on my tcon board that says vgma1, 2, etc.Last edited by OneAn9ryN00b; 08-03-2014, 05:53 AM.Leave a comment:
-
Re: Samsung LN40B530P7N
Just a quick question. I think I may also have a bad as15-g, when testing voltages on the pins, where should I get my ground from? The metal chassis, or the ground pin on the plug from the wall?
Also us there any particular pins I should do? I see some threads that only have 24pins of the 48 total listed, whare others list just particular pins listed.
Thanks in advance.Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
So is there any other things I can try out?
I was looking at the schematics last night and found the chip that I think controls the power, and errors...and found a couple of pins named reset...tempting to short them, but to scared that I'll blow everything.
I think I have tried everything known out there, might just bite the bullet and buy another, just very disturbing that every time this happens thers no reset.Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
The board part number is: DKEYMF733FM12 but from what I have gathered the only difference between the xxLE830U series and the xxLE835U series is that the 835U is 3d. But the service manual has them together. So maybe minor differences between the two,...Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
Just tried all those and nothing, did all while plugging in and holding for 5-10 secs, and also did all those combinations while plugged in and holding in for 5-10secs....doesnt help that these aren't physical buttons, there soft keys. Are there any remote combinations that sharp uses, i know my philips uses the remote for service mode, my philips has a pin you can short on the main board to get into service mode, does sharp have any features like that, or is it just strictly keys on the side of the tv?...Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
There's only one fuse that I can see and its on the power board, and looks alright. Also when plugging in the old main board (the 3-1 error one) I can hear the relays clicking on and off just like before. So I think the power board is ok.
Just tried it and still nothing....Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
So......I may have done a stupid thing......This backlight is on special order and am told could be up to 3 weeks before I get it. So i tried plugging in my tv without the led strip, it lit up for about 30 secs, and the went out with the 1-1 error....thought no problem, when i get the new one it will come back(this thought was before i would later find out it would be 3 weeks) so once finding out it was going to be 3 weeks, I just said while im waiting il plug in the old one and use it till the new on comes in.....well i cant get this 1-1 error...Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
Will do.....but lets hope this doesn't happen again. I Think the part number was for both sides of the strip...at least that what it looked like in the manul...didnt have individual sides....jut top and bottom....and both top and botom are the same part number. And on the order description it said 60" led strip....So i may replace the whole bottom. and save the old ones....Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
Thank you for taking the time to look.
I finally found the correct part number, apparently sharp made a service manual just for the lcd panel, which I didn't have at the time. So found the official part number, searched google and found the only place thats selling them and bought it at $72 a pop....not cheap. Apparently it has to be special ordered, so it wont get here for about 2 weeks. Thank you everyone so far that has helped....Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
No, its two strips of 60 led's each, one strip on the left side and one strip for the right. The one on the left is what i need, and the strip is about 26.75" long including the power connector....Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
Theres a couple of them that i could find theres a sticker on the back:
5028ZZ
1625CH
B01975
1Y360B
and then on the front I have: SLED2011SSP60_60_GD_REV0
For whats its worth I also have a 1f19 after the 30th LED printed on the board
Its about 26 and 3/4 long with 60 led's split into 2 phases of 30 leds each
EDIT: does anyone know what wattage these LED's are....Last edited by OneAn9ryN00b; 10-18-2013, 12:25 PM.Leave a comment:
-
Re: Help with a Sharp LC-60LE835U
Now the fun part is finding that whole strip....seems to be a rare thing for this big of a tv....im still scouring the interwebs though.Leave a comment:
No activity results to display
Leave a comment: