Re: Sony 40EX400 HDMI Input Problem
" Turn on the TV. While holding down (arrow up) on the remote control, press POWER on the TV. (The TV will turn itself off, then back on again.) Release (arrow up)"
And Voila!
Regent
Computer Tech
Last Activity: 07-05-2014, 10:06 PM
Joined: 12-12-2011
Location: Victoria BC
-
Re: Sony 40EX400 HDMI Input Problem
Yes all my ports works!! Must of been a corrupt file somewhere? But its just like new now!
Leave a comment:
-
Re: Sony 40EX400 HDMI Input Problem
Yes all my ports works!! Must of been a corrupt file somewhere? But its just like new now!Leave a comment:
-
Re: Sony 40EX400 HDMI Input Problem
Thanks ecking767 I reset the TV to factory setting and everything is working fine now!!!Leave a comment:
-
Re: Sony 40EX400 HDMI Input Problem
Thanks for your reply ecking676. The manual says " Turn on the TV. While holding down V on the remote control, press POWER on the TV. (The TV will turn itself off, then back on again.) Release V"
But I tried that & nothing happens?
When I press Display, 5, V I get the following menu but I don't see the factory setting option??...Leave a comment:
-
Re: Sony 40EX400 HDMI Input Problem
Thanks for your suggestion Martino. I will see how much a new main board cost.Leave a comment:
-
Re: Sony 40EX400 HDMI Input Problem
No one has any suggestion on how to fix my input menu problem?Leave a comment:
-
Re: Sony 40EX400 HDMI Input Problem
Would anyone have any idea if my Main board is defective or if I have software problem?Leave a comment:
-
Re: Sony 40EX400 HDMI Input Problem
On my other TV it show up as 1080p so I have to assume it a 1080 signal. Also, I did update to the latest firmware. I also unplug the TV & plug in the HDMI into 2,3 & 4 and none of them work. I plug in the VGA cable from my computer and it don't work either!
Am wondering if the main board is defective or if its a software problem?Leave a comment:
-
Sony 40EX400 HDMI Input Problem
Only my TV & HDMI 1 (DVD/BD) Input connector work.But when I plug my HD TV box into HDMI 1 (DVD/BD) it ony show up as 720 not 1080?
If I access the menu only these two choose are highlighted. (as seen in the pic)
Would anyone know if this is a hardware or a software problem?... -
Re: Toshiba 55SL417U Image Problems
Thanks SueVideo for your advice. I reset all my cables especially the ribbon connectors & its working Great now!!Leave a comment:
-
Re: Toshiba 55SL417U Image Problems
No one had any idea what is causing my picture to go green like this??Leave a comment:
-
Toshiba 55SL417U Image Problems
I have Toshiba 55SL417U Led TV. Out of nowhere my screen became a distorted greenish image as you see in the attach pics. Could you please inform me as which IC board would cause that problem?... -
Re: Sony KDL-40EX400 shutsdown
Thanks for the info!! "Firmware update worked for me aswell on this model. TV would come on and shut down 3x before giving a 6 blink code."Leave a comment:
-
Re: How to bypass an auto shut off?
I also believe that a bypass from HI to L and the Dimmer Switch might very well work! The specs on the blanket says 60 watts. Again thanks for your help.Leave a comment:
-
Re: How to bypass an auto shut off?
Thanks for your help.Leave a comment:
-
Re: How to bypass an auto shut off?
If I keep the ON/OFF switch ON by holding it there with an elastic it will default to the low setting after the one hour auto shut off kicks in!
There are three settings low, medium & high. Every time you press the ON/OFF switch it bring you to the higher setting but if you hold the button while on the high setting it will default to the low setting after an hour.
My question is how can I bypass the low & medium and go directly to the high setting from the IC board?Last edited by c_hegge; 02-16-2014, 10:10 PM.Leave a comment:
-
Re: How to bypass an auto shut off?
Thanks for your help & advice budm!Leave a comment:
-
Re: How to bypass an auto shut off?
Thanks budm for your reply. I assume your talking about Triac Z0405MF? There are two of them. I attach two pics, one from the back of the ic board & the other one the front.
Could please you explain which one needs to be bypass & how I should do it?
Circuit boards are not my specialty! Sorry about that! But I do want to learn.
...
Last edited by Regent; 02-15-2014, 11:14 PM. Reason: The back of the ic board the triac are circle with a black marker.Leave a comment:
-
Re: How to bypass an auto shut off?
"the auto shut off itself will still happen because it is programmed into the software."
Thank You very much Longbow for your excellent explanation!!!! I will be looking for another option like a silicone heating strips!Leave a comment:
No activity results to display
Leave a comment: