Hello everyone! Please, help me to find out missing elements and their value. I think there should be 2 resistors or 1 capacitor and 1 resistor. Place near the FBVDDQ coil ...

Re: MSI MS-16JF no video memory power supply

Updated. I soldered N17P-G0-A1 and video memory, FBVDDQ is 0.03V now, the resistance on this lane is 90 Ohm. don't know what could be wrong. Should I change TPS51916 again?

Hello! Has an msi ms-16JF motherboard with a diagnosis "doesn't work". There were a short-circuit on video memory lane. Removed GPU and video memory, changed TPS51916 and transistor on it's lane. Motherboard works OK, has the initialization and video card voltage. But has no video memory voltage. Should there be a video memory voltage without video chip or no? Has the S5 signal 3.3V on TPS51916

Replaced the processor. Everything is fine, but flash drives 2.0 do not work in one of the USB ports, but 3.0 works. Data lines 2.0 are not broken, but the resistance to data lines is different. The difference is 150 ohms. The resistance along the U2DN2_L line is 730 ohms, along the U2DN2_P line - 880 ohms. Other USB ports work properly. Could there be a problem with the processor? Removing the protective diode DS21 did not give a result, the problem is not in it. In Windows it displays with error message, when you put in flash drive there comes the same sound when you put it off and usb device...

Re: New Members - please post your introductions here

Hello everyone. Firstly, wanna thank everyone for materials you post, usually it really helps in repairing. Secondly, sorry for bad English (if it will be)