Re: Philips 42PF7320A/37 42" Plasma 7 red flashes
The new CAPS I put in did NOT blow again, they are fine....but still have the 7 red flashes..but they were blown before I replaced.
adamcbc
New Member
Last Activity: 12-14-2011, 04:44 PM
Joined: 12-07-2011
Location:
-
Re: Philips 42PF7320A/37 42" Plasma 7 red flashes
Thanks Scenic, I downloaded the SM yesterday and am thinking about replacing the Y sustain board. I'm just trying to figure out if the a bad Y sb would cause the two 3300 10v caps to blow on the psb as they did, or if I'm missing something.Leave a comment:
-
Philips 42PF7320A/37 42" Plasma 7 red flashes
Hello, I have a Philips 42PF7320A/37 42" v.4 with the 7 red flashes. I replaced the 2 3300 10v caps that WERE bad, only to find same 7 flashes after psb shutdown. I then have 3 flashes on the alarm led for V_scan. I discon'd the Y sustain board and got all green after powering up, so I discon'd the upper and lower Buff boards and recon'd the Y sus, and again got the 7 red and 3 alarm green. Any help would be greatly appreciated!!! -
Philips 42PF7320A/37 42" Plasma 7 red flashes
Hello, I have a Philips 42PF7320A/37 42" v.4 with the 7 red flashes. I replaced the 2 3300 10v caps that WERE bad, only to find same 7 flashes after psb shutdown. I then have 3 flashes on the alarm led for V_scan. I discon'd the Y sustain board and got all green after powering up, so I discon'd the upper and lower Buff boards and recon'd the Y sus, and again got the 7 red and 3 alarm green. Any help would be greatly appreciated!!!
No activity results to display
Leave a comment: