Re: Hanns Spree 28" Monitor ( HF289H ) Will not Power Up

One quick question... On the Original Brown caps... Is the Gray Stripe with the red dot the negative pole? Because I just replaced the cap and placed the negative pole on the new Radio Shack cap on the same hole on the board. It tripped my braaker or GF5 wen I tried attaching the power cord.. I did have a llose screw that might of grounded the case to the HeatSink Plate... Everything seems cool hopefully.

Re: Hanns Spree 28" Monitor ( HF289H ) Will not Power Up

Thanks Bill... I looked them over and 2 of them were 1.97 and 1.92 Mb's... I knew the limit was 1.9 on JPG's. I was just trying to keep it a bit too close for best viewing purposes.. Well here they are. Thanks Bill.

Manny...

Hello. I have read a few posts here about it and of course I have the same problem. The other models I read about are a different model and Pics show the Power Supply Board to be a bit different. I have had the same problems as the other posts for a few years. Worked fine for several years then Every time I turned off the Monitor it took 15 mins to start once powering up the CPU. Then Progressively it took up to 3 or even 3 hrs to power up. Around August this summer I decided to just leave it on all the time and not power it off since it was a Headache to get it to power back up. Well about a...