Re: Intel d850mv mystery cap

Thank you both!

After browsing Nichicon's catalog for the HD series I found only one item with the same diameter and length with 10V and it shows it as 1500uF. Also, the caps next to the Nichicon are Sanyo 6.3V 1500uF, so I think 1500 is the best bet.

Thanks again!

I decided to replace the caps in an old motherboard for fun. The main blown capacitor, however, appears unlabeled except for the top, where the bulge has made it mostly unreadable. What you can see, especially after scraping off the residue, is:
"HD K3
1x00
10V"
The x in "1x00" is an unreadable digit, and searches for HD K3 have turned up nothing useful. I'm guessing it is either 1000uF or 1500uF? The diameter is 10mm.

Anyone have any insight into what uF this might be? Oh and pardon the dust, these pictures were taken just after...