Re: Dell 2005fpw
Any other suggestions guys?
Spyder45
Member
Last Activity: 02-26-2012, 08:22 PM
Joined: 11-26-2011
Location:
-
Re: Dell 2005fpw
The resistance of that resistor is in spec, and the solder joints are good.Leave a comment:
-
Re: Dell 2005fpw
Do I replace it and see what happens from there? Is there something else I could be checking? Am I at the right forum?Leave a comment:
-
Re: Dell 2005fpw
No caps have been replaced. I did find this discolored wire too.. Is there anything else I should check? I've had to repair the ribbon that goes to the buttons on the the front.. it ripped when i took the face off.. Would that mess up any of the readings?...Leave a comment:
-
Re: Dell 2005fpw
U506 - EF3AD 1117AS33 - pin 1 = 0.00 V, pin 2 = 0.00 V, pin 3 = 121.6 mV
U605 - DF3AD 1117AS25 - pin 1 = 0.00 V, pin 2 = 2.47 V, pin 3 = 4.67 V
U606 - BA033 57 92 - pin 1 = 4.95 V, pin 2 = 10 mV, pin 3 = 3.32 V
U607 - DF4AD 1117AS18 - pin 1 = 0.00 V, pin 2 = 1.76 V, pin 3 = 3.30 V
U608 - BA033 57 92 - pin 1 = 4.67 V, pin 2 = 15 mV, pin 3 = 3.31 V
U610 - EF3Ad 1117AS33 - pin 1 = 0.00 V, pin 2 = 3.25 V, pin 3 = 4.94 V
pin 1 - 12v = 11.7 V
pin 2 - 12v = 11.7 V
pin 3 - gnd = 0
...Leave a comment:
-
Re: Dell 2005fpw
It would always go black.. never saw it go white. how are these pics? i'm checkin those pins now.. thanks for the help so far!...Leave a comment:
-
Re: Dell 2005fpw
No, it stopped working all together now.. the reboot helped on previous times that it had gone blank. All it does now is power the lights on.Leave a comment:
-
Re: Dell 2005fpw
I do have a multimeter. I should have mentioned that it went black all of a sudden.. it had turned off before and all i had to do was reboot the monitor. it never really rolled or flickered though...Leave a comment:
-
Dell 2005fpw
Hey guys, I have this 2005fpw it powers on and the power lights stay on. It says there is no input. I have tried it on other pcs with other cables and still nothing. I took it apart and found a few burn marks on the circuit board and the back of the display. the two burn marks on the back of the display are from contacts from this board.. but it didnt burn the board in those spots but there was some black stuff on those contacts.. the burn on the ciruit board is under the discolored piece.. I dont know what they are? theres 6 of them Could this be fixed?... -
Re: New Members - please post your introductions here
Hey guys I'm Travis.. nice to meet you guys.. came here to learn me some monitor techLeave a comment:
No activity results to display
Leave a comment: