Re: Disassembling an Iiyama Prolite E2407HDS

Please note that behind the stand are 2 brackets which are connected to the front trim.
You need to make sure the screw holes are aligned whe re-assembling otherwise you will have difficulty putting the srews back in.

Re: Disassembling an Iiyama Prolite E2407HDS

Lay the monitor on it's face, remove the stand (4 screws) and remove the 2 screws above the stand. Gently unclip the front trim around the edges of the screen the disconnct the connector the the switch panel and remove the back panel.
The metal case containing the pcbs will now be loose.
Disconnect the ribbon cable from the screen by gently press the 2 side clips and easing the ribbon cable out.
Make a note or take a photo on the 2 sets of connectors in the sides on the PCB case.
Using a small screwdriver push...