Re: 2 CFI-S76 boards with failed caps
Looking at going for the FRs to replace the GSCs and the Rubycon ZLs to replace the teapos, my only concern is the voltage of the Teapo replacements is 10v and not 6.3v, and the height is twice that of the originals, but will this particularly matter?
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: 2 CFI-S76 boards with failed caps
GSCs are 20mm high and 10mm diameter, Teapos are 10mm high and 8mm diameter.
Minimum order is only really a problem with the GSCs as I need 6 and Farnell's minimum order is 5. The Teapos, there's 12 on each board so I'd need 24., so make that 25.
I might just do one of the boards, then I just need to order 5 and 15 respectively.
Will this do instead of the GSCs? The ESR is 0.1809ohms and I have no idea whether that's good or bad, but it's the lowest I can find. Never heard of the brand though. [url]http://uk.farnell.com/illinois-capacitor/228cke010m/capacitor-alum-elec-2200uf-10v/dp/1167980[/url]...Last edited by Markeh; 11-18-2012, 03:41 AM.
Leave a comment:
-
Re: 2 CFI-S76 boards with failed caps
Sorry, will do that now.
Leave a comment:
-
2 CFI-S76 boards with failed caps
Got 2 of these boards. Both have the three GSC 2200uf 10v caps leaking electrolyte from the top (well some are visibly bulged and a couple have started leaking) to the left of the CPU socket (see attached picture 1) and both have a TEAPO 1000uf 6.3v cap bulging, albeit in different places. One board has it in between the northbridge and southbridge, and the other has it up towards the CPU fan header (in the image it's the centre of the 3 caps - this one looks worse in reality than my phone camera can show)
Am I best off replacing with these? (with this Panasonic cap to replace the...Last edited by Markeh; 11-17-2012, 01:42 PM.
No activity results to display
Show More
Leave a comment: