Re: Toshiba 32lk3c63da
Many thanks, everything fell into place...
todor
Member
Last Activity: 09-25-2023, 06:15 AM
Joined: 02-05-2023
Location: Burgas
-
Re: Toshiba 32lk3c63da
Thanks, I will report the result...Leave a comment:
-
Re: Toshiba 32lk3c63da
Thanks, but the TV can't load android and accordingly it doesn't work. And upgrade_no_tvcertificate.pkg, I need this for a toshiba TV. Or how to copy the profile files from chassis 17mb171...Leave a comment:
-
Re: Toshiba 32lk3c63da
Hello, can anyone tell me how to download the pro files on this chassisLeave a comment:
-
Re: Toshiba 32lk3c63da
I'm aware of the risk of damaging the board, that's why I'm looking for a way to download the 17mb171 pro files and disable hitachi logo. With a 17mb181ts board I can afford to do experiments....Leave a comment:
-
Re: Samsung UN65H6203BF
This is a 100% broken display. No suction cups are used to lift screens, you have to push a thin and strong plastic board from the bottom and top of the screen that reaches almost the entire length and push it in very carefully, then lift both parts at the same time, thus avoiding bending of the panel and its damage...Leave a comment:
-
Re: Philips 55PFL8008S/12 two blink error code
This chassis is very capricious. First of all, you need to rebolt the processor and then you need to overwrite the nan flash with working software. If it works, you need to improve the cooling of the processor (under the white radiator). In my opinion, the cooling is not calculated right and that's where the problems come from...Leave a comment:
-
Re: Toshiba 32lk3c63da
I have this file, in order for the TV to be updated, it must work. It doesn't work with menu 1505, and you can't enter the service menu on board 17mb181tc, because it can't load android and the remote doesn't work. I haven't tried just renaming the file, but tomorrow I will try. For board 17mb171 I don't know how to download profile files. And board 17mb171 is android...Leave a comment:
-
Re: Toshiba 32lk3c63da
Unfortunately I don't have a recovery file for board 17mb181tc and I don't know how to download profi files for board 17mb171
This combination does not help. This is an android chassis, not like the others on Vestel...Leave a comment:
-
Re: Toshiba 32lk3c63da
I also asked them but I didn't have any answer. I hope they share...Leave a comment:
-
Re: Samsung UE40F5300AK blinking red light
if the backlight blinks when the main board is turned off, the backlight is wrong.!!!! It should light up steadily and without flickering. When only the power is turned on and the backlight works, there should be about 380-390 v on the 450v capacitor. If there is a fluctuation or is below 370 in not working properly pfc
!!!This board is finicky and may need to rewrite the emc which is a complicated process...Leave a comment:
-
Re: Toshiba 32lk3c63da
As I already wrote, it does not work this way. YES, I specify: 17mb181 recovery file is needed
17mb171 I have not installed software. It was taken from Hitachi. The panel responds, the picture is good, but at startup there is a Hitachi logo. I want to disable the logo, but the procedure for copying the profile file is different and I do not know it. It does not work in the standard way .This is a chassis android and needs another procedure...Leave a comment:
-
Re: VIZIO M60-C3 Can the vertical line be fixed?
From my experience, this is a sign of a stripped ribbon cable on the glass side, try to press it against the glass with something soft and fix it when the line disappears. Care must be taken not to damage the glass!!!! rubber heatsink from processor.Leave a comment:
-
Re: Samsung UE40F5300AK blinking red light
Hello, with the main board turned off, the 220v power supply must be turned on, the backlight should work normally without blinking. If it blinks, there is a problem with it.Leave a comment:
-
Toshiba 32lk3c63da
Brand and model: TOSHIBA
Serial number: 8598380 100136
Chassis: 17MB181TC
Main Board: 17MB181TC
Panel / Matrix: VES315UNGH-L3-N41
T-Con: Built-in on the panel
Power supply: 17IPS62
After logo it reboots.I need a recovery file.Can anyone help.
Since I did not find a suitable file, I installed 17 MB 171, everything worked, but when starting there is a HITACHI logo.
The question for this board is how to disable the logo. I was unable to download the profi files in the standard way. Can anyone help with the procedure.
Thanks to... -
Re: New Members - please post your introductions here
Hello, I deal with the service of led TVs and other household appliancesLeave a comment:
No activity results to display
Leave a comment: