Re: Sony XBR-65X900E 4 Blink Code
I got it all back together, could not figure out where 2 black screws went. Oh well, at least it's back in business.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Sony XBR-65X900E 4 Blink Code
Yup, that seems to be the issue. New led strip is in and the tv turned on. Now to figure out where all of these screws go. Guess I should have kept better track of where they came from.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
I managed to get the tv apart. I bought a led tester and found 1 bulb that does not turn on. I'm guessing that's the issue causing the 4 red flashes.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
Yes, on the replacement board, that cap has continuity to ground on both sides.
The board was described as fully functional from a broken screen unit.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
I've not had a tv apart before so no idea what to expect. I guess I'll go with the plan of removing all screws that I see and go from there.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
well, the replacement board came and is in. Still giving the same 4 flashes.
Is there a guide to access and replace the backlight?
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
Closing the tv up until the parts arrive. Would rather not go tv shopping at this point.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
I found a set of all boards from a supposed cracked tv.
Might get that and change out all the boards.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
It's going through a color pattern, checkerboard pattern. No signs of it turning off. It's playing ambient music as well.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
The circled fuses are not blown.
So the above chart is showing 4 red flashes means the panel itself is the issue?Last edited by my2k2zx2; 01-18-2023, 03:25 PM.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
Going to see if I can find one in a known working condition on ebay.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
I think I'll try a new main board and see if that gets this working again. Not sure what issues it might have at this point.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
the part by the F4000 wording does not beep when I put the probes on both sides of it.
I guess I thought that was a capacitor since it only beeped to ground on one side.Last edited by my2k2zx2; 01-18-2023, 02:28 PM.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
2R2 is 4 ohm on one side, OL on the other.
the little cap is 4 ohm on one side and 0.4 ohm on the other.
The main board is not connected to anything.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
The part 2R2 and the cap to the right of it beep to ground on both sides on my multimeter.
Everything else on the mainboard only beeps on one side....
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
yup, still 4 red blinks with that cable disconnected.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
Where would I check for the led driver voltage? I only see a flat ribbon connecting it to the main board.
No shorts on the capacitors on the led board.Last edited by my2k2zx2; 01-18-2023, 12:42 PM.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
I unhooked the boards and do not see any failed capacitors or burn marks anywhere. Plugging the boards back in did not change anything, still 4 red flashes.
CN6401 voltage all seem to match the legend when the tv is powering on.
bl_err is at 0.028v when the tv is powering on, but then goes to 0.003v when the red light flashing 4 times....Last edited by my2k2zx2; 01-18-2023, 11:35 AM.
Leave a comment:
-
Re: Sony XBR-65X900E 4 Blink Code
I'm having the same issue with our XBR-55X900F. Powers on, starts the android animation, goes black with 4 red led flashes. Is replacing the led strips the only way to fix this one? I have no idea how to get the panel of if that is the case.
Leave a comment:
No activity results to display
Show More
Leave a comment: