Re: Identify a resistor
Thank you!!...
Gatolina
Member
Last Activity: 04-28-2023, 08:56 AM
Joined: 01-01-2023
Location: São Paulo
-
Re: Identify a resistor
Thank you for the reply.
What does this black stripe means?...Leave a comment:
-
Re: Identify a resistor
Thank you so much!Leave a comment:
-
Identify a resistor
Hi! This is probably a dumb question but I can't really figure out the value of this resistor.
Can anyone help?
Thanks!... -
Re: Low Standby voltage on Dell PSU
If someone else is having the same problem, it was a zener diode connected to the En pin (pin 1) that was faulty.Leave a comment:
-
Re: Need help with Dell 7010 dt PSU repair please ( liteon L250AD-00
I don't think there is anything compatible. Have you tried Aliexpress?...Leave a comment:
-
Re: Need help with Dell 7010 dt PSU repair please ( liteon L250AD-00
Unfortunately Tny26x and Tny27x are not compatible. They have different pinouts...Leave a comment:
-
Re: Low Standby voltage on Dell PSU
Thanks for the reply. I'll check that. Best regardsLeave a comment:
-
Low Standby voltage on Dell PSU
Hello! I'm trying to fix this Dell ATX PSU H235PD-01 which had a burned tny279 for the 5V Standby.
I've changed it, checked the capacitors and diodes. Now I have 5.8V in pin 2 (bypass), 358V in Drain (pin 4), reaching the primary of the transformer but only 0.7v outputting to Standby purple wire.
What could be the problem? Thank you... -
Re: New Members - please post your introductions here
Hello! Trying to learn how to my stuff. Greetings from BrazilLeave a comment:
No activity results to display
Leave a comment: