Re: LG 32LX1D will not turn on

Just opened up GFs 32lx1d that had no power, no red led,nothing.

Googled the model number, and knew the 'badcaps' result was the one I wanted.

Had around .6~.9Vdc on ST5.0v.

Scavenged a 47uF 63v from something in the junk box, and the tv is back to health.

Sure is nice to have a resource like this on the web.

Re: Poloroid TDA -03211C- - - -Power Board IPOS 150 Ver. 1.8

Fixed mine. Replaced the three 10pf 3kv ceramic caps near the backlight connector. So far the set has been on and working for the last half hour, which is about 27 minutes longer than I have ever had that backlight stay on. Guess I should go buy a few of these and put them in the set instead of the ones I stole off of an old lcd monitor PS board.

FYI my set is an Element FLX-3210 with this board in it. Had the same backlight lights up for a minute or two, and then shut off leaving the red led on the PS...

Re: Poloroid TDA -03211C- - - -Power Board IPOS 150 Ver. 1.8

DGTECH did you ever find a solution on this set? I have one with the same exact symptoms. Powers up for a few seconds, then the backlight goes off, and the red led on the supply comes on.

Thanks,