Re: Identifying these resistors



Ok thank you for that. It seems it means it's 1% so i gues if i remove the 184 from circuit and test it will be 180000k.

Thanks again for the explanation

Cheers Bob...

Re: Identifying these resistors



It's only the centre digit that is underlined. They are the only 2 resistors on the board with an underline. All the others are normal 3 digits...

Re: Identifying these resistors



I know that normally is the case but what does the underline mean. The 222 works that way but the 184 is totally wrong. It should read 180000k but only reads 70ish k. That's what has me confused...

G'day all,

new here and fairly dumb electronics wise but learning slowly. i have a project i'm working on that has some surface mount resistors that i'm not sure how to identify. one has 222 on it but the middle 2 is underlined and measures 2.1k. The other has 184 with the same underline and this measures 70 something k. These are both still in circuit. Everywhere i've searched i have not found anything relating to an underline when searching for codes. Do any of the gurus on here know what the underline means?

Cheers

Bob

Re: New Members - please post your introductions here

Well i'm just an old fart that has started playing with electronics to fix some of my own stuff. Retired and just playing around