Re: Ersa Rds 80 soldering station burnt resistor
sorry looked like R8.....There is a few r103 on board......
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Ersa Rds 80 soldering station burnt resistor
hi...if you look to the left hand corner.of picture...says J3.above that it says C18...to the right of that cap there is a resistor marked R8..read the the resistor...it may be the same one you need
just my guess ....... The resitor burnt out is also marked R8Last edited by the old man51; 04-04-2023, 07:38 AM.
Leave a comment:
-
Re: rebuild nintendo switch
if caps are shorted around chips.......the chip needs changing.......desolder chip and test caps again..to see if short goes away
Leave a comment:
-
Re: rebuild nintendo switch
if caps are shorting....the chip is faulty.....also check caps near charging port..if shorted also change chip
Leave a comment:
-
Re: ps5 disc, white light, no display
check liquid metal for spillage
Leave a comment:
-
Re: ps5 disc, white light, no display
have u tested the filters for shorts...or is the small cap missing under hdmi pins right side
Leave a comment:
-
Re: Diesel heater emergency power supply / poor man's UPS
[url]https://www.youtube.com/watch?v=TWC5oGU_QWY&ab_channel=DavidMcLuckie[/url]
try this guyRe: Diesel heater emergency power su...> try this guyRe: Diesel heater emergency power supply / poor man's UPS
[url]https://www.youtube.com/watch?v=TWC5oGU_QWY&ab_channel=DavidMcLuckie[/url]
try this guy
Leave a comment:
No activity results to display
Show More
Leave a comment: