Re: Asus VW222U
Thanks for your reply.
When I fix it, I'll let you know what exactly was the problem.
BAD85
New Member
Last Activity: 02-11-2012, 10:25 AM
Joined: 10-26-2011
Location:
-
Re: Asus VW222U
Brand is not important in this case, because the capacitors are used only for the test. They are new.
The device has to start with a new capacitor, whatever brand it was.
Brend is Teapo, Chieftec use them.
By "everything else is good at measuring" I thought that all components in the primary area are good. And I believe that the defect is in the primary section, not in the secondary. I just can't find it.
Thanks for your reply...any ideas?...Last edited by BAD85; 10-26-2011, 06:15 PM.Leave a comment:
-
Re: Asus VW222U
Hi guys, I have the same monitor with the same problem as Tyronmatthews.
Did you find a solution for this problem?
My measurements showed that the voltage at pin 6 on 1203P60 is 9.48 Volts, and should be, as far as I know, between 16 and 20V.
It is the only thing I noticed, everything else is good at measuring.
Caps are also in good condition, I even changed them to make sure of that.Leave a comment:
No activity results to display
Leave a comment: