poster1
Member
Last Activity: 12-12-2024, 08:05 AM
Joined: 11-23-2022
Location: Poland
-
Thanks! This one works fine and saves correct settings in outimage.bin Ill experiment on it... -
Which original backup file? I've attached original bios in post #1.Leave a comment:
-
Could You disable ISH and attach .bin file? Laptop has no touchsreen.
I think i have bricked versions of Intel FIT or something is wrong with my pc. It builds image but there are no changes in output.bin file 🤓
Motherboard im trying to repair has previous repair attempts. I am not sure auther GPU or CPU are funcional. That the reason why i want bootguard disabled - in case of another CPU or GPU related issue i will be able to use PCH on another board. When i'll boot it with Bootguard level5, it may brick and save that bootguard setting forever.Leave a comment:
-
Thank You. Could you provide Flash Image Tool, which worked to do that?
Possible to disable bootguard? Your bios has bootguard enabled level 5....Leave a comment:
-
Thank You for reply.
Service Tag: J1TNKW2
PCH chip was taken from Acer Nitro board (LA-H501p). I've also attached dump from this board in the archive. (ACER pch donor.bin)
Replacement PCH had no bootguard (hash 0000-s, bootguard set to: 0 No_FVME)Leave a comment:
-
Dell G3 3590 SELEK_N18P_MB ME Clean Request
Model: Dell G3 3590
MB: SELEK_N18P_MB 18825-1
CPU: SRF6X (I5-9300H)
GPU: N18P-G0-MP-A1 (GTX 1650)
PCH: SR40B
Please help me clean ME (or move ME region from donor bios).
I've tried some versions of FIT12, but outimage.bin is still "Initialized" and has same old ME version.
If its possible, please disable BootGuard.
There are 2 .bin files in the archive; One is old bios, the other - bios from donor board (I've replaced PCH chip, i didnt power board yet).
Thanks in advance!... -
Thank You! Could You provide flash image tool you used to clean it?Leave a comment:
-
Dell inspiron-24-7459 All-in-One ME clean request
Please clean ME Region:
Dell inspiron-24-7459 All-in-One
IMPSL-PD rev a01
I use Flash Image Tool 11 and 11.0.0.1178_CON_H_D_PRD_RGN.bin ME file, but outimage has still "initialized" ME status. (It should be "Configured", shouldnt it?)... -
Re: Probook 450 G2 LA-B181p, ME clean request
Thank You, XM25QH64A (ME Cleaned) works fine
Leave a comment:
-
Re: Probook 450 G2 LA-B181p, ME clean request
1)Device autostarts when AC adapter is connecter
2)Shows display after ~30s
CMOS bat is 3.3V and bios settings are correct.
Here is correct dump...Last edited by poster1; 11-24-2022, 07:54 AM.Leave a comment:
-
Probook 450 G2 LA-B181p, ME clean request
Hello!
Please clean ME Region in my bios dump.
Probook 450 G2 LA-B181p
Thanks in advance...
-
Re: New Members - please post your introductions here
Hello guys, im a repair hobbyst. I joined badcaps to learn more about laptop repair.Leave a comment:
No activity results to display
Leave a comment: