Re: Need unlock HP elitebook 830 G6
It works, thank you!
Just a question, why does it affect touchscreen function? Even in the 830 G7 after the removal of the Endpoint error, the touchscreen of the monitor does not work. I tried reinstalling Windows but still no prevail. For both laptops...it is strange. I don't know if anyone else has this problem....
sophago
Member
Last Activity: 11-16-2023, 02:07 AM
Joined: 11-17-2022
Location: Florida
-
Re: Need unlock HP elitebook 830 G6
Hi masters. I have Elitebook 830 G6 with Endpoint Security Error and I already have removed the bios passwords. The only concern for me is now Endpoint error since it does not allow me to update to the latest firmware. Here I have both chips uploaded. If anyone can unlock them for me. Thanks
SN: 5CG0171TCG
PID: 9MR35UP#ABA...Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
Thank you for the files, it works now. Bthw it says System booting in Manufacturing Mode with its times counting down, what does it mean?
And the serial is not showing in the bios. Do I have to add them separately?
And another thing, the touchscreen is not working, does it have to do with the bios or maybe an error by my side? Thanks in advance!...Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
It works now, thank you!...Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
Thnx, I will try and let you know....Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
Hi thnx for the files, but now it doesn't turn on at all, and capslock light is not blinking but just stays on! Looks like board receives power but doesn't turn on at all. What might be the problem? Thanks...Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
Hi, here are the dumps,
SN: 5CG0421DH0
PID: 227H4UP#ABA
Thanks in advance...Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
yep, makes sense. THNX...Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
Hi, I am not quite sure which one is the EC chip, from this 2.
I know about the bios chip because i removed it last year but when it comes to EC chip it has to be this one with 256 on it, right? just wanted to double check. Here you have 2 picture of the 2 chips which I am not sure, one is in the front of the board, the other one is on the back....Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
Hi, almost a year ago, I removed the bios password from Elitebook 830 G7 and 830 G6.
Password was gone but had the problem with HP security endpoint for both of them.
I neglected that problem because was not very important for me, but now when I try to update firmware it just goes on a loop and never updates it, it goes back to windows login.
Something stops the update process and still the HP Endpoint security shows up like it always did. I checked the serials Board ID etc and they are good in the DMI....Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
Thank you a lot, it worked!...Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
Thanks, I will let you know how it goes....Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
So, do I need to take that 16mb file from the post you mentioned and write it on my chip? The one in the post you mentioned is with password, do I have to remove that first then program it? Thanks...Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
The thing is, I accidentally ruined the wson chip while desoldering it, ordered a 8pin soip with the same features and now I need to put a new dump file on it. I don't have any backup dump from the previous. I read the new chip with programmer and works fine and its empty since its brand new from digikey. How do i proceed? thanks
Attached are some pics of the old chip which is ruined....Leave a comment:
-
Re: I need bios dump for Elitebook 830 G7
I mean the 16mb file for the 128mbit chip. Thanks...Leave a comment:
-
I need bios dump for Elitebook 830 G7
Hi everyone, I need the 16mb bios dump for Elitebook 830 G7.
Board no:CAMELLIA-6050A3136201-MB-A01(A1)
SN: 5CG0421DH0
Thanks in advance. -
Re: I need help with Elitebook 830 G7
Thank you for your help....Leave a comment:
-
Re: I need help with Elitebook 830 G7
Assuming everything fits well, then do I need to create a thread on Bios Requests and then give the serial nr of the board and hope someone will post the bios dump file of that particular board? Thanks...Leave a comment:
-
Re: I need help with Elitebook 830 G7
The traces look fine, above you have some pics of the flash. Thanks...Leave a comment:
-
Re: I need help with Elitebook 830 G7
Thanks for the reply, I checked with the meter and they are still fine, here are the pics of the flash attached.
So you are saying that I can place a bigger chip with the same size like 8*6mm?...Leave a comment:
No activity results to display
Leave a comment: