Re: Can a Bestec be made good?

I see I need to recap or replace all the Bestecs - very soon. They are not really servers, but they all are Point-Of-Sale stations, and it's awful when they go down.
Thanks for all the answers..
bojoe

Re: Did Bestec kill my MB?

Well that sure clears that up!
Thanks Wizard and bgavin,
bojoe

Assuming that a Bestec 300 has not yet gone bad, (ie., volts still correct), can it be made "good" by recapping, or is it inherently bad by design?
I have 6 systems (Emachine\Gateways) running on Bestecs.
Thanks,
bojoe

I have a 4-year old Emachine T5026 with Bestec ATX-300-12EB3. The first problem was while running it reported that it couldn't read the HD. After replacing the HD, it would not power-on. I have replaced the Bestec PS (which has many bulging Jamicon caps) with a new Seasonic ES300. The 5vsb presents at 5.01. The actual power-on switch is closing across the MB terminals, but the PS-ON green from MB does not go LOW to fire the PS, remaining at a steady 5.01.

The MB does not show any bulging caps. I'm ordering a Blue ESR kit, but none yet. Question #1 is - can I manually pull PS-ON...