LoL
I must be blind…
I think 562 I used as replacements will be good enough.
If yes, then I have to find out why I have a drop voltage (witch I think is not right) on ntcs.
Thanks!
Petros_Z
New Member
Last Activity: 03-15-2025, 01:02 AM
Joined: 10-20-2022
Location: Pirea
-
Here you are.
Update. I managed to destroy another one 738!!
I have replaced the two broken 738 with 5.6kohm resistors. All of them are marked with red circle.
Please don't judge the mess on the board. I had only a 40w solder iron with a fat tip. The rest are remains of paper towel.
If more photos are needed I will try again.Leave a comment:
-
candy tumble dryer (evoc 981 at-s) Component 738
Hello. I have a board of a candy tumble dryer (evoc 981 at-s).
It does not give an error but it keeps drying even without load. It has 3 ntc. Two are for the clothes and one for the compressor. I measure them and they look ok. I went to the board to measure the voltage given to them. It gives about 4v and it is going down as the ntc value going down.
Because I wanted to measure more easily I tried to solder wires on the board. Probably I manage to destroy the component of the title. It looks like as a smd resistor. Hopefully there were other two same components. I disorder them and... -
I refer to aluminium substrate as a difference between the strips.
Anyway, I don't see major difference between A and S type. I will use a coin to choose. Head for A and tail for S.
One more thing. Sorry for world "stripes". Now I see that the correct is "strips". Can someone correct it at least on title?
ThanksLeave a comment:
-
Thanks. There are 2 stripes with 11 leds.
Both (..A.. and ..S..) have the same: amount of leds, orientation of leds, length (574-575mm) and connector.
Those from your link looks like of the original? I have. I am not sure about the holes (I don't think that this is a problem). Also, my stripes (..A..) don't have aluminum substrate and those from your link (also ..A..) have.Leave a comment:
-
Led stripes for Toshiba TV 32W1433DG
Hello, I have the TV of the title and it has problem with the led stripes. The code of the stripes is VES315WNDA-01. Also on the chassis there is a code "Model VES315WNDS-01". Searching for spare parts I found that there are led stripes for each of those codes. I don't know if someone had changed them before. Based on what code should I order the spare parts? From led stripes or chassis?
Thanks in advance and sorry for my bad English. -
Hello, my name is Petros and I am from Greece. I finished my electrical engineering studies years ago. Now I am working as a repair man on household appliances. I don't have big experience in electronics and also my English are not good. Thanks for the acceptance.Leave a comment:
-
Re: New Members - please post your introductions here
Hello.
My name is Petros and I am from Greece. My job is about home appliances repairs. My knowledge about electronics is limited. I found the site when I was trying to fix my pc monitor or my tv. I don't remember exactly.
Nice to meet you and sorry for my bad English….Leave a comment:
No activity results to display
Leave a comment: