Re: Syncmaster 305t resolution issue

ok my bad main board is what i called the t-con board, i have replaced it with a new board and still have same issue. i will check continuity on the d-dvi cable tomorrow just to cover that base as well. if the new t-con board was bad i wouldnt think that i would have same condition as the old board. but then NEW stands for Never Ever Worked sometimes.

Re: Syncmaster 305t resolution issue

well re-soldered the connectors, same condition persisted. broke down and bought a new main board, thinking i had maybe over heated something. same problem persists. checked voltages coming from power supply and on the main board and all are good and clean. checked continuity of all cables hoping i have a broken wire, but all checked out ok.

any more ideas?

Re: Syncmaster 305t resolution issue

ok reseated the cables and same condition persists.

Re: Syncmaster 305t resolution issue

Yes I removed the board for reheating, i will reseat the cables again.

but wouldn't their not being seated properly affect all resolutions?

I have a 305T that I recapped for a screen distortion issue and then a no display with power indicator flashing.

I also used a hot air station to heat the Altera chip to reset it.

Upon completion of these two tasks, i have a great screen, but only at 1280 x 800 resolution.

I have looked for drivers for the monitor, evidently there are none, updated my video drivers (this monitor was working fine on the pc before the repair), i tested monitor on a second pc and still a no go, i swapped out the dual link dvi cable same condition. When i attempt to reset...

Re: New Members - please post your introductions here

HI ALL

I am Lonnie Pence and currently a student at Southeastern Community College in West Burlington, Iowa.

I am a nontraditional student having returned college to change careers to the IT field. Am completing an AAS, and AS and then on to a four year school for a BS in computer science.

I have an electronics back ground from the Navy and my personal tinkering.

lpence