I have posted elsewhere but I thought it prudent to start a new thread with the board name in the title bar.
I have an old Jumptec 07008-0000 with a 486 AMD processor and its bios clock chip needed to be replaced recently. consequently the date time etc is all fresh and needs to be defaulted at least to allow access to the system on board.
The problem is the bios is OEM password protected and nothing works. I have even read the bios flash IC in a hex reader to see if there was anything standing out, 4 hours later and still non the wiser.
The bios version is PISBR214 manufacture...

Re: JUMPtec Industrial PC need help remove a bios pasword

a couple of things i have discovered are, JRC.exe is a Jumptec piece of software that was used as a bios extension via a serial port and couple be used via another pc linked via RS232 to setup the bios on this SBC, also jumptec was taken over by Kontron AG and i am still awaiting any information relating to either the software or the password from them..

Re: JUMPtec Industrial PC need help remove a bios pasword

hi guys, was there ever an answer on this thread ? I am in the same screen with the same Kraus Maffei machine type .
and answers would be appreciated please ;-)