Re: LiteOn PA-6601-1A (600w) blows its TOP
thanks yur a life saver
sigma
New Member
Last Activity: 10-09-2011, 10:24 AM
Joined: 10-05-2011
Location:
-
Re: LiteOn PA-6601-1A (600w) blows its TOP
Lol, yes I did ..... my initial troubleshooting approach was a bit primitive....Leave a comment:
-
Re: LiteOn PA-6601-1A (600w) blows its TOP
Ok so looking at pic 2 from post #12 its the greenish circle glued to the side of REL1. (I'm on my phone right now so when I get home I'll take a pic of where it was )Leave a comment:
-
Re: LiteOn PA-6601-1A (600w) blows its TOP
i can't id the part cause it was glued to the board with white epoxy like adhesive to the main relay and i can't remove the epoxy from the board to see the part number. it's the part that is with REL1Leave a comment:
-
Re: LiteOn PA-6601-1A (600w) blows its TOP
Hi guys I'm new here, I was troubleshooting one of these power supplies and was able to narrow the problem down thanks to this post. Unfortunately b4 I found the problem I futher damaged the PS whole troubleshooting, another component burnt besides the R302, it's the resistoe next to the relay. I can't identify it cause it broke apart. Can anyone tell me what type and value it was?Leave a comment:
No activity results to display
Leave a comment: