well it seems that I was wrong! I just saw someone measuring around 0.150ohm on a known good RTX 3060 ti saying that it's normal for recent GPUs to have such a low reading, I definitely didn't know about that, my bad!
also did you find the issue on your laptop gshark1?...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
hi! thanks for the response, yes you're right! from experience sometimes smd caps and stuffs can go short just because they feel like to, or sometimes it's a symptom of another cause, that's why you never assume and it's important to verify, in my case it's really a short though (reading 0.1ohm between vcore and ground) and there's no power getting into the GPU! (but yeah I should've been more precise, I'm kinda new on the forum so sorry about that ^^')Last edited by tronitas46; 01-01-2024, 01:25 AM.
Leave a comment:
-
hi! I have an MSI laptop with a rtx 3060 with the same issue, although I'm unsure if it had BSODs since it's a laptop someone gave me, the laptop works just fine with the IGP but the 3060 is nowhere to be seen, just like you I checked all the software possibilities with no success, then I decided to take a look at the hardware and found that the power delivery GPU side was shorted to ground, at the moment I'm not properly equipped to diagnose dead shorts so I haven't checked it further, but maybe you have the same problem
Leave a comment:
-
need schematic or boardview for MSI katana GF66 (MS-15811)
hi! I'm looking for a schematic or boardview for a MSI katana GF66 (i7-11800H and RTX 3060) board is a MS-15811 ver 2.1 if someone have it I'll be very grateful! though I don't have much hope since I did a lot of research, checked all the websites that I know of and I didn't find it, even someone on vinafix asked for it 6 months ago and he got answered that it was currently unavailable, but I'm still asking! we never know, thanks!!Last edited by tronitas46; 12-15-2023, 03:06 PM.
-
Re: New Members - please post your introductions here
Hello all!
I'm Nathan, and I'm from Québec in Canada, I love audio and computer stuff, and especially (trying to) repair them, I really want to learn more about how electronics works and how to repair them, I came across this website/forum while searching schematics for GPUs, and so far I really like this forum and everyone seems very friendly! and I really want to thanks everyone for all the schematics available here!!
Leave a comment:
No activity results to display
Show More
Leave a comment: