Re: Activating graphics on the CPU.Motherboard: NEW71 LA-5893P
Hello mcplslg123.
The problem was in the GPU chip. The computer worked normally without the GPU driver installed, when the driver is installed it has the symptoms of image freezing and losing the image.
Reinstalled the new OS, Windows 7 and Windows 10...
I tried installing its original driver and various versions of the driver, I even updated the BIOS and its several versions from newer to older, then changed RAM modules 2GB, 4GB, 8GB DDR 3 and DDR 3L. Last time I heated the GPU chip and the problem...
leks
Member
Last Activity: 12-15-2022, 05:56 PM
Joined: 08-27-2022
Location: Baska
-
Re: Activating graphics on the CPU
Does anyone know the answer?Leave a comment:
-
Re: Activating graphics on the CPU
Of course..
Packard Bell EASYNOTE_TM85-JO-588CH
MODEL NO: NEW90
Motherboard: NEW71 LA-5893P Rev:1.0
2010-01-25
It had a GPU: NVIDIA GeForce GT 320M
CPU: INTEL i3 370M
BIOS: v1.23Leave a comment:
-
Activating graphics on the CPU.Motherboard: NEW71 LA-5893P
Does anyone know how to activate graphics?
I removed the graphics chip from my laptop which was faulty..
but my laptop has integrated graphics on the CPU..
I tried to reset the BIOS, but without success.. still no picture. -
Re: ene KB926QF D3
Thank you..Leave a comment:
-
NEW71 LA-5893P REV 1.0 ene KB926QF D3
Hello everyone. Does anyone know about IC (ene [COLOR=Red]KB926QF D3[/COLOR]) it can be programmed?
Chips such as (ene KB9012,KB9016,KB9022,etc..) are programmable,and for the chip (ene [COLOR=red]KB926QF D3[/COLOR]) I did not find information that it can be programmed..
Things are like this, I have a motherboard (NEW71 LA-5893P REV 1.0 2010-01-25) and i want to program startup chip (Super I/O) which I found a dump for (EC) "[COLOR=Blue]Acer Aspire 5742G Compal NEW71 LA-5893P REV 1.0 EC.bin[/COLOR]".Hello everyone. Does anyone know about IC (ene [COLOR=Red]KB926QF... -
Re: RAM slot JDIMM1 does not work on Packard Bell EasyNote TM85-JO-588CH
Thanks loopster.
Here is some feedback...
I soldered the entire RAM slot and tested the computer...
1. It read both RAM slots, out of 10 power-ups it did not recognize the first slot 3 times. At one point it happened that it did not read the second slot as well.
2. When he read both slots, it happened that after reading the operating system, after three or four minutes, he lost the image 3 times for a few seconds, and the fourth time he was left without an image....Leave a comment:
-
Re: RAM slot JDIMM1 does not work on Packard Bell EasyNote TM85-JO-588CH
Hello reformatt
The problem is that sometimes it recognizes the first RAM slot, sometimes it doesn't...
When it recognizes the RAM and I let the software test the RAM, it shows that it is good, as soon as I turn off the computer and do not use it for two to three hours, it does not recognize the first RAM.
then I have to remove the first RAM and so on several times until it recognizes it.
Sometimes a black image happens until I remove the first RAM.
I tried at least five correct...Leave a comment:
-
Re: RAM slot JDIMM1 does not work on Packard Bell EasyNote TM85-JO-588CH
anyone? please
Leave a comment:
-
RAM slot JDIMM1 does not work on Packard Bell EasyNote TM85-JO-588CH
Hello everyone.
Has anyone had this problem on their model Bell EasyNote TM85-JO-588CH ?
RAM slot JDIMM1 does not work on Packard Bell EasyNote TM85-JO-588CH
Board model: NEW71 LA-5893P Rev 1.0
CPU: Intel(R) Core(TM) i3CPU M370 @ 2.40GHz
GPU: Nvidia GeForce GT 320M 1024GB DDR3
RAM
DR3
-
Re: New Members - please post your introductions here
Hello Badcaps community.
I have been looking for a good electronics repair forum and this seems to be one of the best..
My hobby is Electronics and I want to go further..
I have had electronics repairs the hard way and the easy way, and every repair makes me happy.
Thanks to the community for being a member.Leave a comment:
-
Re: HP G62-b39SE (PM I HPC S MV MB V3) (P/N 01013Y000-600-G)
And I need it for: HP G62-b39SE (PM_I_HPC_S_MV_MB V3) (P/N 01013Y000-600-G)
Is there anyone?Leave a comment:
No activity results to display
Leave a comment: